You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




CB Radio distance and clarity
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
joe schmoe
Posted 2010-04-05 10:29 AM (#56694)
Subject: CB Radio distance and clarity


Tourer

Posts: 446
East TN

I have started using my CB while on the interstate. It seems to me that the range/distance is not that good for a CB...Best i can GUESS I am getting about 1 to MAYBE 2 miles of transmit out of the thing ('09 Vision with all updates)...I would expect better for a CB band type radio....

 Even receive seems to be weak as I can not hear that many truckers other than the ones close to me, say 2 or 3 miles away from the Interstate all CB traffic fades away...

What have you allexperienced with your CB???

Top of the page Bottom of the page
STARSHIP 1
Posted 2010-04-05 10:44 AM (#56696 - in reply to #56694)
Subject: Re: CB Radio distance and clarity


Cruiser

Posts: 137
Houston, Texas
I use my factory CB when riding in a group and it is not unusual to talk five or six miles on flat terrain and two to three miles in hilly/mountainous terrain and the reception is almost double that...

The HD riders I ride with are always complaining about how much better my CB radio sounds than their bikes with the factory HD CB

The only issue I have with my CB is it will stop transmitting after maybe ten seconds......probably the PTT switch....it is my understanding there were some problems with the early CB/intercom switch modules .... out of warranty now so I live with it



Edited by STARSHIP 1 2010-04-05 10:45 AM
Top of the page Bottom of the page
radioteacher
Posted 2010-04-05 3:14 PM (#56715 - in reply to #56694)
Subject: Re: CB Radio distance and clarity


Visionary

Posts: 3006
San Antonio, TX
This should help. Check out the link below.

http://www.vision-riders.com/bb/forums/thread-view.asp?tid=2435
Top of the page Bottom of the page
rdbudd
Posted 2010-04-06 7:05 PM (#56806 - in reply to #56694)
Subject: RE: CB Radio distance and clarity


Visionary

Posts: 1632
Jasper, MO
Something isn't quite right there Joe. You should be able to talk 5 or 6 miles in level terrain, and sometimes even farther if you are out in the wide open spaces with no electrical interference around. Is your CB set for local or distant? Your receive range will be limited to only a mile or so if set to local. If it's set for distant, I would check the antenna and ground connections.

Ronnie
Top of the page Bottom of the page
varyder
Posted 2010-04-06 8:26 PM (#56822 - in reply to #56694)
Subject: Re: CB Radio distance and clarity


Visionary

Posts: 8144
New Bohemia, VA
I don't really use mine enough to know all the details, but I do know the mike set sucks. At the house though it seems to pick up around 4 or 5 miles and talk just as far. I think it might be around 3 miles on the road, but no one can understand me with the mike.
Top of the page Bottom of the page
ScoreBo
Posted 2010-04-06 9:36 PM (#56830 - in reply to #56694)
Subject: Re: CB Radio distance and clarity


Iron Butt

Posts: 1117
Northeast Ohio
Chris, do you have the stock Vic or J&M headset?
Top of the page Bottom of the page
joe schmoe
Posted 2010-04-07 9:47 AM (#56870 - in reply to #56806)
Subject: RE: CB Radio distance and clarity


Tourer

Posts: 446
East TN

rdbudd - 2010-04-06 8:05 PM Something isn't quite right there Joe. You should be able to talk 5 or 6 miles in level terrain, and sometimes even farther if you are out in the wide open spaces with no electrical interference around. Is your CB set for local or distant? Your receive range will be limited to only a mile or so if set to local. If it's set for distant, I would check the antenna and ground connections. Ronnie


It is set to distant...I was thinking about taking it to a CB shop and let them do a SWR reading and output check....

Top of the page Bottom of the page
charbin
Posted 2010-04-09 8:05 AM (#57057 - in reply to #56694)
Subject: Re: CB Radio distance and clarity


Cruiser

Posts: 88
Lavon, TX
<p>I started out using the factory Vic headset.  Was convinced that my CB unit was bad UNTIL Spock allowed me to try his J&M elite headset.</p><p>We swapped helmets, and all of a sudden, my CB was working great and his was acting poorly.</p><p>I immediately ordered two sets (one for me and one for my wife) of J&M elite headsets w/AeroMike II (along with the required Vision downcords) from gearupaz.com (best pricing I could find on J&M).</p><p>I can now transmit and receive as expected with my CB unit.</p>
Top of the page Bottom of the page
Mrhunk2002
Posted 2010-05-26 11:27 AM (#60801 - in reply to #56694)
Subject: RE: CB Radio distance and clarity


Puddle Jumper

Posts: 9
I have a 2010 Victory Vision Premium Blue w/ GPS -CB stage one, I cannot hear the CB in my head set when turned all the way up nor can anyone else hear me transmit, The sound is so low no one can hear me. Any Suggestons? Yes I have the factory system and Head Set.
Top of the page Bottom of the page
joe schmoe
Posted 2010-05-27 7:01 AM (#60880 - in reply to #56694)
Subject: Re: CB Radio distance and clarity


Tourer

Posts: 446
East TN
My guess would be the headsets....My J&M headsets CRANK out the audio!! THe J&M ELite headsets ALMOST sound better than the Visions speakers!!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™