|
|
Cruiser
Posts: 53
Island Lake, Alberta, Canada | Does anyone have EBC part numbers for the front and rear pads? |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | FA261HH Front, FA196HH Rear. Complete EBC parts catalog: http://www.motorcycleproshop.com/acc/ebc.asp?OVRAW=motorcycle%20bra... |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | is it true that the stock victory brake pads are better than aftermarket in terms of noise? |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | Arkainzeye - 2009-09-20 5:36 AM is it true that the stock victory brake pads are better than aftermarket in terms of noise? I wouldn't know at the moment, I replaced mine with victory pads about 8,000 miles ago and i've got a squeak I can't seem to get rid of. It's not bad, but just annoying. |
|
| |
|
Visionary
Posts: 1484
LaPorte,Tx. | I did not have a noise issue with the stock pads for 30,000 miles. I have not had a noise issue with the EBC pads over the last 7000 miles. |
|
| |
|
Cruiser
Posts: 117
Spring Hill, Tennessee | I have always had great luck with the Lyndall brake pads. Planning on using them on my Vision now. The best part will be avoiding all the brake dust that accumulates on my chrome rims!
Lyndall Front Part # - 7174
Rear Part # - 7230 |
|
| |
|
Tourer
Posts: 354
20 miles west of Chicago. | I would check with Lyndall about those part numbers. Their web site may have out of date information as they list the 7174 and 7230 pads for all Vics, 1998 to present. Up to the Visions Victory used Brembo brakes. Starting with the Visions they went to Nissin brakes and the pads for these may be different. I'm not absolutely sure the pads are different, but before ordering I would make sure. |
|
| |
|
Cruiser
Posts: 117
Spring Hill, Tennessee | Thanks for the Heads-Up! I will definitely check on that. |
|
| |
|
Cruiser
Posts: 117
Spring Hill, Tennessee | Mudge - 2009-09-22 2:35 PM
I would check with Lyndall about those part numbers. Their web site may have out of date information as they list the 7174 and 7230 pads for all Vics, 1998 to present. Up to the Visions Victory used Brembo brakes. Starting with the Visions they went to Nissin brakes and the pads for these may be different. I'm not absolutely sure the pads are different, but before ordering I would make sure.
Hey Mudge,
Thanks for the heads-up! I took your advice and wanted to post the response I got from Lyndall Brakes.
Gary,
Our part # 7229 will fit the front and back of the '09 Vision.
We are completing manufacturing on this item and will have it ready to ship
by December 1st.
Please let us know how we can be of service.
Thank you for choosing Lyndall Racing Brakes!!
Best regards, Paul
Paul Kittrell
President, CEO
Lyndall Racing Brakes, LLC
800.400.9490
714.241.9991
FAX 714.241.9993
www.lyndallracingbrakes.com
Like I said earlier, I have always had great success with the Lyndall Brake pads. I do recommend the Gold's! |
|
| |
|
Visionary
Posts: 1436
| I'm running the EBC pads and much prefer them over stock. No noise with either but better brake control with the EBC's in my opinion. |
|
| |
|
Cruiser
Posts: 293
Arkansas | Aren't the Lyndall's the ones with the rotor and pad combo that cost several thousand dollars? I may be remembering something else- seems they were carbon or some exotic compound. If that's true, I'll need a few sponsors to go with those! lol |
|
| |
|
Cruiser
Posts: 117
Spring Hill, Tennessee | The Lyndall's are about $50 or $60 bucks a set. That is just the pads and the "Gold" pads as well. You can get the less expensive ones as well. I do believe all of the pads are "dust free" pads. I believe they are made with a ceramic compound, but don't quote me on that? |
|
| |
Brake Pad #s?
