You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Switched power
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
sjavera
Posted 2008-01-02 9:42 PM (#3719)
Subject: Switched power


Puddle Jumper

Posts: 47
Lake Park, GA
I modified a Genie remote for my garage door and needed switched power. After digging around a bit under the front valance (metal trim) I followed the power wire from the center headlight (the switched light on the center console) and low and behold, there is a switch power lead and ground right in front - VERY accessible.

If you pull off the valance, look for a two wire plug directly up front that has a black wire and a pink wire with a green stripe. The plug has a rubber cap on it.

I tapped into the pink/green wire for 12 volt power, the black wire for ground. (or you could ground to the aluminum frame up front)

I suspect that this plug is for aux. lights.

So now i flip the center light switch on the console and the garage door opens and closes :-)

I hope this helps if switched power is needed.
Top of the page Bottom of the page
pollolittle
Posted 2008-01-03 2:46 PM (#3736 - in reply to #3719)
Subject: Re: Switched power


Visionary

Posts: 2027
Brighton, TN
You want to give up how you did this, with the garage door opener.
Top of the page Bottom of the page
sjavera
Posted 2008-01-03 9:20 PM (#3742 - in reply to #3736)
Subject: Re: Switched power


Puddle Jumper

Posts: 47
Lake Park, GA
Sure will ... let me get some info together and I'll post it up.
Top of the page Bottom of the page
wrr1home
Posted 2008-01-07 7:59 PM (#3883 - in reply to #3742)
Subject: Re: Switched power


Cruiser

Posts: 196
Stuart,
I, too would like to see how you did this!
Thanks!
Bill
Top of the page Bottom of the page
jama
Posted 2008-01-08 1:36 AM (#3886 - in reply to #3719)
Subject: Re: Switched power


Cruiser

Posts: 293
Arkansas
Just a question: For those who have the premium tour; I guess the voltage is picked off that switch before
it is stepped up to mega volts for the HID. Gut tells me 12V. Does it make a difference when flashing the HID?
Is it ok to do that w/o affecting reliability?


Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™