You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




So many brake pad choices... give me a break!
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Vetrepreneur
Posted 2018-09-25 8:08 AM (#192692)
Subject: So many brake pad choices... give me a break!


Puddle Jumper

Posts: 7
Herriman, UT United States
I am re-born into motorcycling. Back in the Air Force days of the 80's. Briefly dabbled with riding again in mid-90's. Back in May bought my dream bike. Victory Vision!
Time to replace brake pads.
Recommendations?
I found these options at 2 locations. More are available I am sure.

https://www.jpcycles.com/2014-victory-vision-tour/brake-pads

https://buywitchdoctors.com/c/294/victory-vision-brake-pads-accsys-s...

Thank you in advance for your suggestions.

Edited by Vetrepreneur 2018-09-25 8:09 AM
Top of the page Bottom of the page
rdbudd
Posted 2018-09-25 10:35 AM (#192693 - in reply to #192692)
Subject: Re: So many brake pad choices... give me a break!


Visionary

Posts: 1632
Jasper, MO
It looks like there are plenty of choices. I replaced mine, on my 2008 Vision, with OEM Victory pads. I realize that may not be an option now.

Ronnie
Top of the page Bottom of the page
johnnyvision
Posted 2018-09-25 1:43 PM (#192694 - in reply to #192692)
Subject: Re: So many brake pad choices... give me a break!


Visionary

Posts: 4278
Sintered metal will stop you quite a bit faster then oem. EBC and Lindall are high on the list of good pads.
I like oem for the rear cause there thicker and you use the rear a lot to slow down.
Make sure you take the metal perforated backs form the old ones and put on the new pads they quiet the pads.
Aftermarket stops 100% better then oem
look at Dennis Kirk free same day shipping
Top of the page Bottom of the page
BumbleDB
Posted 2018-09-25 9:57 PM (#192695 - in reply to #192692)
Subject: Re: So many brake pad choices... give me a break!


Cruiser

Posts: 73
The EBC pads put some pretty heavy wear on my rotors.
Just replaced the front rotors and went Lindall all the way around. The Lindall rear pads bear a very strong resemblance to the OEM pads.
According to Lindall, they don't cause wear on the rotors. We'll see.
Disclaimer: replaced rotors had 133Kmi on them.

Edited by BumbleDB 2018-09-25 9:57 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™