You are currently not logged in.  Logon or register to access more features. is a FREE service provided by Victory Riders Network.


Fuel door repair.
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech ReferenceMessage format
Posted 2016-08-14 8:19 PM (#188155)
Subject: Fuel door repair.


Posts: 1290
Ruskin, Fl
This did not come out as well as I planned, but it works perfectly. I put grease on a broken drill bit and tried to build up the JB Weld around it and then pull it out. That did not work, the epoxy stuck to it like tar and I was afraid it would be impossible to remove. I just put a glob of epoxy down, drilled it out and shaped it with a Dremel.









Attachments IMG_8062.jpg (137KB - 5 downloads)
Attachments IMG_8064.jpg (153KB - 2 downloads)
Attachments IMG_8044.JPG (75KB - 1 downloads)
Attachments IMG_8048.JPG (67KB - 1 downloads)
Attachments IMG_8068.jpg (119KB - 1 downloads)
Attachments IMG_8047.jpg (126KB - 1 downloads)
Attachments IMG_8047.jpg (126KB - 2 downloads)
Attachments IMG_8070.jpg (141KB - 2 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™