You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Question on pulley bolts
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
visionriderlasvegas
Posted 2016-05-28 1:22 PM (#184227)
Subject: Question on pulley bolts


Puddle Jumper

Posts: 10
Las Vegas, NV United States
I know I should have a owner's manual but I don't. Now that my wife and I both own 2011's I need to get one. So, my question. In the owner's manual, is there any mention of how often the bolts that hold the pulley to the wheel should be inspected and/or torqued? If you saw my previous post in general discussion, you know I had 1 back out enough to damage the swingarm and another was 2 turns loose. My dealer is trying to help me out, my "bumper to bumper" warranty was denied. Don't know how. Any input would be greatly appreciated. My bike is an 11 Vision Tour but I think most Victory's have this drive set up.

Thank You!!!
Top of the page Bottom of the page
johnnyvision
Posted 2016-05-28 5:20 PM (#184228 - in reply to #184227)
Subject: Re: Question on pulley bolts


Visionary

Posts: 4278
check when you get a tire. Most shops have to pull the pulley to get it in there tire machine.
if you re torque you destroy the original torque
Top of the page Bottom of the page
Arkainzeye
Posted 2016-05-28 8:31 PM (#184230 - in reply to #184227)
Subject: Re: Question on pulley bolts


Visionary

Posts: 3773
Pittsburgh, PA
Yeah like Johnny said .. check when you get a new tire.. I know when I install a new tires I have to take the pulley off.... also when I owned you 2008 vision I learned real quick to read what the warranty covers .. I had a rear rotor denied ..
Top of the page Bottom of the page
visionriderlasvegas
Posted 2016-05-29 2:45 PM (#184237 - in reply to #184227)
Subject: Re: Question on pulley bolts


Puddle Jumper

Posts: 10
Las Vegas, NV United States
These are the original tires so the pulley bolts should never have been touched. Does anyone have a copy of the owner's manual that specifically states these bolts are not to be touched?? I would like a copy of that if possible.

Thank You
Top of the page Bottom of the page
johnnyvision
Posted 2016-05-29 6:25 PM (#184240 - in reply to #184227)
Subject: Re: Question on pulley bolts


Visionary

Posts: 4278
scroll down fill in the blanks

http://www.victorymotorcycles.com/en-us/owners-manuals
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™