You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 18
Austin, Texas | Okay, so I got the three bolts loosened and replaced the right side tip with the new Gatlin. I go to do the left side. I loosen (and get out) two of the bolts. The third (middle) bolt is not really gettng loose. Turns out the threaded collar on the original exhaust tip is just spinning with the bolt. I can't find an obvious way to keep the collar from spinning.
Any ideas on this one?
Kevin |
|
| |
|
Puddle Jumper
Posts: 17
| remove the muffler cut the bolt head off. or "try" to cut the bolt head off while its on the bike, by using just the hack saw blade...
good luck.
cdevon1200 |
|
| |
|
Iron Butt
Posts: 1158
Richmond, Virginia | Sorry to hear you have the bolt problem, if its any consequence, I just put on my new tips and your effort will be worth it !!! they look awesome. |
|
| |
|
Tourer
Posts: 412
Fargo, ND | and they sound ? |
|
| |
|
Cruiser
Posts: 141
| No different really ,the good looks are well worth it. Other people even non biker types pick up on them right away . |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Gatlin tip install problem
