You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 21
| The lower wind deflectors on my Vision fell off. I need the template to glue them back on. I don't have the template because the dealer installed them.
Does anyone have a template they could send me?
Thanks,
Manny
-----
2014 Vision Tour White (keeper)
2014 Vision Tour Black (totaled)
2010 XR Black (traded)
2007 Vegas 8 Ball (traded)
2001 Suzuki Volusia (Traded) |
|
| |
|
Puddle Jumper
Posts: 7
| i just saw your post and yes, I keep my template for just that reason. I could sent it to you if you still need it. I'd like them back when you're done with them. |
|
| |
|
Puddle Jumper
Posts: 21
| I got one thanks. |
|
| |
|
Cruiser
Posts: 82
Fargo, ND | I had both of my lower wind deflectors blow off on my way to Sturgis in 2010. I re-installed them with auto trim adhesive tape from a body shop. Before I re-attached them I drilled 2 ,( 1/4) inch holes in each of the mounts. One hole drilled 1 1/2" from the front edge of the mount. The other hole was drilled just behind the square part of the mount. After the lowers were mounted for 24 hours I carefully drilled through the faring (be very careful not to puncture the gas tanks). With 8 machine screws (1/4" x 1 1/2) I secured the mount to the faring. You will need small fingers to reach behind the faring as you thread the nut onto the screw. Add a drop locktite to each screw before you insert it into the mounts. Tighten them up and never deal with that problem again. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Needed: Vision lower wind deflectors template.
