You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 19
Maylene, AL | I just bought the Fluted Exhaust tips for my 2008 Vision. How easy/hard is the install of these tips. |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | It's easy (you've got the stock exhaust I assume). There are three bolts holding the stock tips on. Unbolt them, slip the new tips in place, and replace the bolts.
Ronnie |
|
| |
|
Cruiser
Posts: 271
Belding Michigan | Yes well that is easy in the saying somewhat less easy in the doing. A standard size human hand does not fit into or bend the way you need to just take out the bolts and put in new ones. I switched tips with some special tips from the Witch Doctor they look great but by the time I got them on the bike I was speaking in tongues and still had to pull apart a large amount of the plastic in the back of the bike. it was a great plan and they look nice but not so easy to do. Archie |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | I used the Victory fluted tips and had no problems. Yes, the bolt on the backside of the muffler is really close to the bodywork, but the right tools got the job done without removing any bodywork. It took me about 30 minutes to replace both tips. 2008 Vision--stock pipes.
Maybe I don't have standard size hands.
Ronnie
Edited by rdbudd 2013-11-22 10:57 AM
|
|
| |
|
Visionary
Posts: 4278
| 10mm open end wrench. You can buy this LA Awesome degreaser at the dollar store and its the greatest way to clean the tips
http://www.lastotallyawesome.com/
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Fluted Exhaust
