You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 209
| while checking clearances on shock and link bolts, I noticed [useing a small prybar} there is side to side or [front to back] movement on shock. about 1/2" is this normal? |
|
| |
|
Tourer
Posts: 466
Grand Cane, LA | Sounds like they didn't put the bushings back in that fit on the pivot pin on both sides of the bearing. You shouldn't have that much movement, maybe a 1/4" at most. Should be an aluminum bushing on both sides of the upper link at the pivot bearing. |
|
| |
|
Visionary
Posts: 4278
| here from what I see its just a bolt but wouldn't trust this drawing
(10VN.gif)
Attachments
----------------
 10VN.gif (7KB - 3 downloads)
|
|
| |
|
Visionary
Posts: 4278
| say go to net put in victory and click on web site. NOW in bottom left hand corner is parts list and owners manual. All you half to do is sing up |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
rear shock movement
