You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 175
Hinton, Iowa | I just got done putting a set of wheels from a 2011 Cross Country on my 08 Vision. What I found out is that the Vision used studs and nuts T bolt the rear pulley on and the Cross Country uses bolts. The studs are longer and with the CC wheels the studs hit the swing arm so I had to pull the wheel back off and cut the studs down about a 1/2 inch so they would clear the swing arm. Since we are leaving Tuesday bright and early for the Southeast meet I wouldn't have time to put bolts in. So when I get back I will have to pull the wheel and replace the studs with new bolts.Really like the Look of the wheels om my 08 Tour Premium. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | from 09 and on Vision rear wheels used that same pulley setup. only 08 was different. i believe the CC wheels are the same as the Newer Vision wheels. |
|
| |
|
Visionary
Posts: 4278
| Gee the hardware store dosn't carie metric bolts? Sorry I'm to late to tell you |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | what about the spacers and axle. I'm sure a lot is the same or close. Also, good to know, I didn't know there was a difference in the rear wheel on an '08 to the rest, I feel even more specialer now... |
|
| |
|
Tourer
Posts: 457
Green Bay, WI United States | So what is your milage now on the Bentley varyder?? The 6104 post kinda freaks me out........ |
|
| |
|
Tourer
Posts: 457
Green Bay, WI United States | woops - mileage |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Crosscountry wheels on an 08 Vision
