You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 277
Apopka, FL | OK, I just received my "rubber bumpers" from Vic for the trunk. They have a rubber nipple which you would think would have a corresponding hole to fit into, but no. Having trouble figuring out where these go. No instructions and they do not fit into the recessed hole areas in the lid. Help. |
|
| |
|
Cruiser
Posts: 71
Willmar, MN | Ask your dealer for installation sheet for the rack. The bumpers are actually a part of that. You have to drill I believe a 5/16 hole on each side of the center latch (center the hole on the flat area next to the latch). I saw something on here about being able to install them with out taking the trunk lid apart but I couldn't, I had to take the top off to pull the bumper tab through the hole. |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Here's a link to some pics.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=5919&pos... |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Trunk rattle question
