You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




2010 Vision 8 Ball - Dyno results
Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
lova
Posted 2011-11-04 10:02 PM (#100718)
Subject: 2010 Vision 8 Ball - Dyno results


Cruiser

Posts: 142
My local Victory Dealer had a free Dyno run this past weekend...

The second run was the best one @
Max Power = 84.30 Max Torque = 105.97

Is that good? Please any comments?

I have the Big Honkers, front and top performance air filter, and the VFCIII from Llyod'z

I will post a video soon ...

Cheers!



(DynoVision2010edit.jpg)



Attachments
----------------
Attachments DynoVision2010edit.jpg (64KB - 0 downloads)
Top of the page Bottom of the page
wroman
Posted 2011-11-04 10:11 PM (#100720 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Tourer

Posts: 432
Gettysburg, 2008 Tour Premium		I would say this is pretty good for what you have done. 60 ponies at 3,000 will always do well by the seat of the pants dyno.
Top of the page Bottom of the page
lova
Posted 2011-11-04 10:23 PM (#100722 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Cruiser

Posts: 142
thx !

man i wish i could break the 90 HP without upgrading with the cams ... im not sure if it's even faisible.

Edited by lova 2011-11-04 10:24 PM
Top of the page Bottom of the page
mackgoo
Posted 2011-11-04 11:59 PM (#100725 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Cruiser

Posts: 58
San Clemente		I'm thinking your HP is off. The torque looks great. Check out this run of a totally stock engine.
I forget how to add a link to an image. Check out Lloydz web site. His run was 83 HP for a stock engine.
Top of the page Bottom of the page
XRsteve
Posted 2011-11-05 8:23 AM (#100727 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Visionary

Posts: 2300
Georgia, west of Atlanta		Pretty good numbers, you might be able to get a few more if it's tuned on the dyno. All ECM base maps leave a little on the table. Both the VFC III or the PC V can benefit from a dyno tuning session with a experienced tuner..........Might get 90+ HP
Top of the page Bottom of the page
rush21122
Posted 2011-11-05 7:59 PM (#100753 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Puddle Jumper

Posts: 10
Go for the Lloydz cams, intake and D&D exhaust. I did and all I can say is HOLY CR@P! what an improvement. Worth every penny plus Lloyd is great to work with
Top of the page Bottom of the page
lova
Posted 2011-11-06 7:36 PM (#100841 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Cruiser

Posts: 142
thx fellaz for the comments......my BDay is soon, so Lloydz cams, come to papa my precciiiousssss....lol
Top of the page Bottom of the page
lova
Posted 2011-11-07 7:00 AM (#100872 - in reply to #100718)
Subject: Re: 2010 Vision 8 Ball - Dyno results


Cruiser

Posts: 142
here is the video http://youtu.be/B18csg97Srs
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™