You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Fork brace
Jump to page : 1 2
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
JustBob
Posted 2010-08-19 11:13 PM (#67475)
Subject: Fork brace


Cruiser

Posts: 162
Extreme Southern, AZ United States
There was some discussion some time back about someone looking in to design and build a fork brace for the Vision.  Anyone have any idea if they made any head way?  I ride my TP all the time, in a year I have 12+K on it and I have four other bikes i switch out on.  I have never had any issues with tar snakes till the other day.  I was riding in Bisbee, AZ up Texas Canyon and the tar snakes were all over the road.  The front end felt like it was all over the place.  My brother on his Xcountry had not a problem.  Once i got out of the canyon it was no problem.  I never want to feel my bike handle like that.  I took my 02 TC over the same route today, and no issues, the bike tracked like it was on rails.  So anyway has anyone heard anything about a fork brace?
Top of the page Bottom of the page
kevinx
Posted 2010-08-20 6:35 AM (#67479 - in reply to #67475)
Subject: RE: Fork brace


Visionary

Posts: 1340
Gainesville Fl Home of the Gators
On my recent trip putting 350+ miles on an X bike every day for a week. I hit several sets of tar snakes that pulled the seat deep in my ass. With the inverted forks on the X it was not due to front end flex. It was about hitting the strips wrong.
Top of the page Bottom of the page
varyder
Posted 2010-08-20 8:45 AM (#67488 - in reply to #67479)
Subject: RE: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
kevinx - 2010-08-20 7:35 AM

On my recent trip putting 350+ miles on an X bike every day for a week. I hit several sets of tar snakes that pulled the seat deep in my ass. With the inverted forks on the X it was not due to front end flex. It was about hitting the strips wrong.


I have to use the quote on you KevinX since you're bold enough to put this to rest. This mess about the Vision and tar-snakes has become ridiculous in my mind. I rode a stretch of highway out west that was nothing but tar-snake and I never slowed even though the bike did a little dance on some of them as would anyother bike. Even the physic of what folks are saying that makes a Vision different on tar snakes doesn't even jive as you have a 1,000lbs with rider and two contact patches, tell me what is different.

If a person finds something as little as a tar snake an issue, please give up riding altogether as there are far greater hazards out there that you cannot handle. Do it for your family if for nothing else.
Top of the page Bottom of the page
CoolHandLuke
Posted 2010-08-20 10:20 AM (#67498 - in reply to #67488)
Subject: RE: Fork brace


Iron Butt

Posts: 849
, FL United States
varyder - 2010-08-20 9:45 AM
This mess about the Vision and tar-snakes has become ridiculous in my mind. I rode a stretch of highway out west that was nothing but tar-snake and I never slowed even though the bike did a little dance on some of them as would anyother bike. Even the physic of what folks are saying that makes a Vision different on tar snakes doesn't even jive as you have a 1,000lbs with rider and two contact patches, tell me what is different.

If a person finds something as little as a tar snake an issue, please give up riding altogether as there are far greater hazards out there that you cannot handle. Do it for your family if for nothing else.

I have to agree with Chris. I have just shy of 43k miles on my Vis and have ridden many roads with "tar snakes" on them and never thought anything of them. Yes my Vis does move around a bit on them but I don't slow down or feel that I have to ride any differently. JMHO
Top of the page Bottom of the page
JustBob
Posted 2010-08-20 9:51 PM (#67533 - in reply to #67475)
Subject: Re: Fork brace


Cruiser

Posts: 162
Extreme Southern, AZ United States
<p>Well. Ok so it's in my mind? OK. I rode my TC over the same area and there was nothing, nothing. The bike did not even feel them. The Vision did it again today. After checking tire pressures, rear shock pressure and riding one up instead of two, the bike felt the same way. Another friend who has a Vision 8ball experienced excactly the same thing I did. He was really freaked. I know yall ride some miles, but so do I. I have three other bikes and none of them react this way and the TC has over 160K on it. The Harley doesn't react either cause i rode the same course last week and it did not feel like this. It freaked out my buddy so much he is thinking about trading his brand new 8Ball Vision in on a XCountry. Normal tar snakes don't bother the bike. Here in AZ we have lots and lots of em, and the bike has never reacted like this. I ride the Hell out of my bikes and treat the Vision like a big crotch rocket. I am saying that I never felt anything like this, it was like riding on marbles or something. The reason I asked about fork braces is that my Brother said he noticed my forks looked like they were flexing. (he rides a XCountry.) I am not going to get rid of my big crotch rocket, but I am not going to ride it down Tombstone Canyon anymore.</p><p>And by the way Mr. Var whatever, you can kiss my Ass.  I have been riding since I was 8 and that was 51 years ago.  I have ridden competitively both on and off road.  I ride year round, and ride hard. If you have nothing beneficial to add to the conversation you should just keep your mouth shut.     </p>

Edited by JustBob 2010-08-20 9:58 PM
Top of the page Bottom of the page
varyder
Posted 2010-08-20 10:14 PM (#67534 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
Okay JUSTBOB. The crazy thing is I rode across Arizon, through the desert there across 160 and in and around Barstow in 110 degree heat, and there is plenty of tar snakes. The comparison that is being made from one bike that folk say they ride, and then the Vision, I have not experienced the severity of the issue. We even have plenty of tar snakes here in Virginia and very hot days as well, never have experienced what you folks that have the problem you describe. I have only ridden again for 5 years and started again on '84 GoldWing. That bike scared me in a lot of situations, and had my doubts if I really wanted to ride again. When I got the Vision it seemed my confidence level rose dramatically and have riden conditions I would never have give thought to on the Wing.

I just don't know what it is that I'm doing any different, but rightfully so, if it scares you that much it is best to get rid of it.

As far as riding hard, I hope we can ride together one day. I average around 1,000 miles in 15 to 18 hours.

Edited by varyder 2010-08-20 10:19 PM
Top of the page Bottom of the page
BLK08
Posted 2010-08-21 9:29 PM (#67575 - in reply to #67475)
Subject: RE: Fork brace


Puddle Jumper

Posts: 47
Lynchburg Virginia

Please let a nebe to this form insert a simple opinion. Tar snakes come in all forms. Some thin, some wide, some found on smooth straight sections of road. Others can be found in turns where the speed and lean angles that I find them is somewhat unsettling. But In my opinion untill two people follow the same line at the same speed on the same streach of road it is usless to compare notes on how a given motorcycle behaves when put to the test with a given road condition. As the owner of a 2008 Vision Tour I would ask if any one has made the same discovery I have? Sit on your Vision on a smooth level surface, both feet flat on the ground. Lock the front brake. Then with the front tire straight ahead, jerk! the bars to the right or left 30 to 40 degrees. Now is it just my bike or can you feel the flex in the front end I feel. FYI This is not my first ride, I have Thirty years exp. up on 2 wheels. Just wondering if I am the only one.

Top of the page Bottom of the page
chesshiretuna
Posted 2010-08-21 9:33 PM (#67576 - in reply to #67475)
Subject: Re: Fork brace


Tourer

Posts: 390
Maybe the Vision is giving more road feedback than your other bikes. Do your other bikes weigh as much as the vision? I live in the Houston area and there are some roads that the snakes are slipperier than others. The Vision slips on some but not others , never had the feeling that I was going down.
Top of the page Bottom of the page
chesshiretuna
Posted 2010-08-21 9:37 PM (#67577 - in reply to #67575)
Subject: RE: Fork brace


Tourer

Posts: 390
BLK08 - 2010-08-21 9:29 PM

Please let a nebe to this form insert a simple opinion. Tar snakes come in all forms. Some thin, some wide, some found on smooth straight sections of road. Others can be found in turns where the speed and lean angles that I find them is somewhat unsettling. But In my opinion untill two people follow the same line at the same speed on the same streach of road it is usless to compare notes on how a given motorcycle behaves when put to the test with a given road condition. As the owner of a 2008 Vision Tour I would ask if any one has made the same discovery I have? Sit?on your Vision on a smooth level surface, both feet flat on the ground. Lock the front brake.?Then with the front tire straight ahead, jerk! the bars to the right or left 30 to 40 degrees. Now is it just my bike or can you feel the flex in the front end I feel. FYI?This is not?my first ride, I have?Thirty years exp. up on 2 wheels. Just wondering if I am the only one.



The bars are rubber mounted...is this the feeling you have?
Top of the page Bottom of the page
varyder
Posted 2010-08-21 9:39 PM (#67578 - in reply to #67575)
Subject: RE: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
BLK08 - 2010-08-21 10:29 PM

Please let a nebe to this form insert a simple opinion. Tar snakes come in all forms. Some thin, some wide, some found on smooth straight sections of road. Others can be found in turns where the speed and lean angles that I find them is somewhat unsettling. But In my opinion untill two people follow the same line at the same speed on the same streach of road it is usless to compare notes on how a given motorcycle behaves when put to the test with a given road condition. As the owner of a 2008 Vision Tour I would ask if any one has made the same discovery I have? Sit?on your Vision on a smooth level surface, both feet flat on the ground. Lock the front brake.?Then with the front tire straight ahead, jerk! the bars to the right or left 30 to 40 degrees. Now is it just my bike or can you feel the flex in the front end I feel. FYI?This is not?my first ride, I have?Thirty years exp. up on 2 wheels. Just wondering if I am the only one.



I don't know about the flex, but that is what saved me from getting hit in an intersection when a lady ran the redlight. I saw her coming out of the corner of my eye, I started braking hard, and when it got slow, suddenly the front wheel cocked left and the bike stop dead and dropped just as she whizzed by inches from the front. I'll take you on that one.

Or are we talking the same thing? I just saw CT's post, and yes the handle bars are rubbery on purpose so you won't feel the good vibrations....

Edited by varyder 2010-08-21 9:41 PM
Top of the page Bottom of the page
BLK08
Posted 2010-08-21 9:44 PM (#67580 - in reply to #67577)
Subject: RE: Fork brace


Puddle Jumper

Posts: 47
Lynchburg Virginia
chesshiretuna - 2010-08-21 10:37 PM BLK08 - 2010-08-21 9:29 PM

Please let a nebe to this form insert a simple opinion. Tar snakes come in all forms. Some thin, some wide, some found on smooth straight sections of road. Others can be found in turns where the speed and lean angles that I find them is somewhat unsettling. But In my opinion untill two people follow the same line at the same speed on the same streach of road it is usless to compare notes on how a given motorcycle behaves when put to the test with a given road condition. As the owner of a 2008 Vision Tour I would ask if any one has made the same discovery I have? Sit?on your Vision on a smooth level surface, both feet flat on the ground. Lock the front brake.?Then with the front tire straight ahead, jerk! the bars to the right or left 30 to 40 degrees. Now is it just my bike or can you feel the flex in the front end I feel. FYI?This is not?my first ride, I have?Thirty years exp. up on 2 wheels. Just wondering if I am the only one.

The bars are rubber mounted...is this the feeling you have?

Thanks for the info, I do know the bars are rubber mounted I just think for me, and maybe its just my bike but rubber mount or not, there should not be that much response lag in the front end. I did not make this discovery early on and will wait untill this winter to examine the mount on the bars with the idea of possible changing to a stiffer mount.

Top of the page Bottom of the page
varyder
Posted 2010-08-21 9:50 PM (#67581 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
BLK08 - Songfan mention not long ago his was worn excessively and he replaced his. Mine seem to be holding up good at the moment, got the originals.
Top of the page Bottom of the page
BLK08
Posted 2010-08-21 9:57 PM (#67584 - in reply to #67576)
Subject: Re: Fork brace


Puddle Jumper

Posts: 47
Lynchburg Virginia

I ride in the moutains most of the time, small curvey two lane roads. The Vision feedback through the bars is a trade off, Loss of feedback in return for less vibration.



Edited by BLK08 2010-08-21 10:00 PM
Top of the page Bottom of the page
varyder
Posted 2010-08-21 10:06 PM (#67585 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
what neck of the woods you be blk08? Sounds like the valley maybe???
Top of the page Bottom of the page
BLK08
Posted 2010-08-21 10:12 PM (#67586 - in reply to #67585)
Subject: Re: Fork brace


Puddle Jumper

Posts: 47
Lynchburg Virginia

All roads leading to and from the BRPW. RT. 39 Through Goshen, Rt 43 Around and through New Castle, Crab Tree Falls RD. through Amherst. Just to name a few.

Top of the page Bottom of the page
BLK08
Posted 2010-08-21 10:19 PM (#67587 - in reply to #67585)
Subject: Re: Fork brace


Puddle Jumper

Posts: 47
Lynchburg Virginia

varyder - 2010-08-21 11:06 PM what neck of the woods you be blk08? Sounds like the valley maybe???

Sounds like you have a lot of time to spend in the saddle, wish I were so lucky. Between work and other intrests, my time on two wheels is not as overflowing.

Top of the page Bottom of the page
varyder
Posted 2010-08-21 10:26 PM (#67588 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
I think if you tighten up with new bushings and make sure they're tight you'll be good. I find the feedback on mine is excellent. If you want some good roads to ride that makes the Dragon (*yawn*) look straight, go out on roads from Alt58 and RT23, up around Pound, Norton, Jenkins
Top of the page Bottom of the page
JustBob
Posted 2010-08-23 10:13 PM (#67729 - in reply to #67475)
Subject: Re: Fork brace


Cruiser

Posts: 162
Extreme Southern, AZ United States
Now that you've gotten your rock off Mr. Var. I would like to hear from someone, other than you, who can answer my original question. Not asking for any Opinions, just asking for information.
Top of the page Bottom of the page
Tarpits99
Posted 2010-08-24 12:09 AM (#67733 - in reply to #67475)
Subject: Re: Fork brace


Iron Butt

Posts: 742
North Orange County CA
I met with a technician at Superbrace back in April to let them measure my 08 for a Vision fork brace. They had put out a request for local Vision to volunteer for a couple of saturdays to allow them to prototype a fork brace.

After taking the measurements the tech was not encouraging about their ability to manufacture a Superbrace style product for the Vision due to the limited clearance between the forks and the inner fairing and gas tanks.

Since then I have heard nothing; this does not necessarily mean anything, but my guess is "that's all she wrote".
Top of the page Bottom of the page
varyder
Posted 2010-08-24 5:12 AM (#67739 - in reply to #67587)
Subject: Re: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
BLK08 - 2010-08-21 11:19 PM

varyder - 2010-08-21 11:06 PM what neck of the woods you be blk08? Sounds like the valley maybe???

Sounds like you have a lot of time to spend in the saddle, wish I were so lucky. Between work and other intrests, my time on two wheels is not as overflowing.



I just make riding my primary mode of transportation. I can't afford a "toy", therefore it won't sit. I have to drive the car now and again just to keep it running.
Top of the page Bottom of the page
kevinx
Posted 2010-08-24 6:21 AM (#67741 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 1340
Gainesville Fl Home of the Gators
I'm not saying that it does not happen, but perhaps because of the Visions very large envelope. People are hitting these curves at a higher rate of speed, and the old mass times momentum aspect of physics kick in
Top of the page Bottom of the page
Teach
Posted 2010-08-25 10:18 PM (#67908 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 1436
Justbob, As Tarpits99 stated he had his bike at SuperBrace for a measurement, BUT I wouldn't take their comments as anything more than they are already done with design and production for this riding season. They design and make the braces during the winter months. Thy kind of gave me the same line when I first inquired as to whether they would be making one for the Vision, then they were looking in the fall for someone to bring a Vision in for measurements. Check the SuperBrace website periodically after the first of the year or email them to make an inquiry.

As to the tar snake issue? Well I think a lot has to do with where one is riding as to how badly the Vision reacts. In PA where I'm at the tar snakes are raised and they swell badly with even minimal sun exposure. Since they use a rubber ground compound mixed into the crack fill you end up with rubber on rubber and the flex is bad. I noticed the same type of compound being used in an area I rode in GA last summer. Of course riding across 11 states this summer I noticed many different tar snake practices. Some states fill and sand/dust. Others fill and wipe off the excess, and still others don't fill the crack to the surface. I think material and fill practices contribute.
I also believe the differences among individual bikes plays a roll in the handling. Mine was fine the 1st year but year 2 and 3 made my butt pucker. There was some minor twisting due to the weight of the bike, but the reaction from certain tar snakes could be scary.
Now I know we have the most macho members here who ride over metal spikes without regard for any possibility of puncture, and of course riding 60-70k seems a huge accomplishment for which they can stroke their own ego, but for us mere mortals who have only managed to accumulate a million miles on 5 continents, the tar snakes might just force us to sell our bikes, for our own good of course, pfffft!!!

So email SuperBrace JustBob and make sure you follow up regardless of the initial reply. And I'm glad nothing has changed here, lol....
Top of the page Bottom of the page
wroman
Posted 2010-08-25 11:43 PM (#67911 - in reply to #67475)
Subject: Re: Fork brace


Tourer

Posts: 432
Gettysburg, 2008 Tour Premium
My original set of Dunlop E3's reacted a little to snakes. I switched to a Bridgestone front and E3 rear and while riding out to AVR and back had the occasion to ride many snaked up roads two up and I have got to tell you the bike did not even know the snakes were there. A trick BMW riders use whenever the front wheel comes of is after installing the front axle and before it gets tightened down they bounce the suspension to prevent the forks from being offset in any degree alowing them to react without sticking. I dont know if this would help with the vision but similar instructions are even written into some BMW service manuals. Also a good way to see if something has been tweeked out of kilter. Bounce with bolts loose and bolts tightened, any difference and there could be a problem.
Top of the page Bottom of the page
varyder
Posted 2010-08-26 5:15 AM (#67914 - in reply to #67475)
Subject: Re: Fork brace


Visionary

Posts: 8144
New Bohemia, VA
wroman - you bring up an excellent point and will incorporate that into future tire changes.

Edited by varyder 2010-08-26 5:17 AM
Top of the page Bottom of the page
mkultra
Posted 2010-08-26 6:37 AM (#67921 - in reply to #67475)
Subject: Re: Fork brace


Tourer

Posts: 374
Tucson, AZ
I think the most determining factor is the material being used to seal the cracks. Some states I had ridden through seem to be better/or worse than others. Here in Az. the local jurisdictions use different materials. Application is also key. I do know that if they use the Pima County spec. material and dont get carried away with the application I have zero problems. I found this to be true with all of the various bikes Ive owned over the years. So I try my best to avoid the lateral ones, try to cross the perpindicular ones as close to 90 degress as possible, and just plain pay attention on roads that have a bunch of them.......just my 1.8 cents....

mike
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™