|
|
Visionary
Posts: 3006
San Antonio, TX | If you can get over the fact that I am not a professional actor, director nor cameraman, here is a video for the middle brake light modification from KansasGuardsman.
Please let me know if I messed it up. If so I will try to correct it and or make it better.
Here is a link to the tech thread.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=2680&pos...
Here is a link to the video.
http://www.youtube.com/watch?v=5-QPAMpVmhw
P.S. I know I need to remove the sticker on my V Panel. It is looking bad around the edges after 11 months of riding. It comes off this weekend.
Edited by radioteacher 2009-06-02 11:40 PM
|
|
| |
|
Visionary
Posts: 3204
Memphis | Hey Paul, Nice job on the Vis-ectomy (snip, snip)! I'll also be making the Kury 4710 mod shortly. Classy opening slide on the video! |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Tom,
I am going to remake the video in 720p format. Youtube.com likes that format better and it will look better. It will take me some time to redo the video but this is a good start. I am still trying to figure out this video conversion/editing stuff.
Those two snips hurt me more then the Vision. The whole time I was thinking, "Oh my God, what if this breaks something!"
Those are the best pictures I have on the laptop.
I plan on a video for the Kury 4710 mod as well.
Ride Safe!
Edited by radioteacher 2009-06-02 11:54 PM
|
|
| |
|
Cruiser
Posts: 73
San Diego, Ca | Thanks for the video . Will do this mod to my bike and will look foward to the trunk light modification video . |
|
| |
|
Fountain Inn, SC United States | Paul - great video! It's always good to see some DO the mod. And thanks for plugging the site at the end! Great Job! |
|
| |
|
Cruiser
Posts: 50
Huntsville On Canada | Hey Paul great job on the video thanks so much for showing us how easy it is. will be preforming my own Vis-ectomy soon.. Tom |
|
| |
|
Tourer
Posts: 367
Cottage Grove, Mn | Radioteacher; Thanks for the video - KansasGuardsman; Thanks for the mod. |
|
| |
|
Cruiser
Posts: 99
Kansas City, Ks | Looks good..
My guess is that Victory turn those lights off to bring more attention to the ones flashing..
Would it overload the circuit to connect the top lights to the middle to make the turn signal more
noticable? |
|
| |
|
Cruiser
Posts: 97
Brighton, Colorado | Radioteacher! THANKS!!! They didn't fix it on the '09 either. Now that I know FOR SURE which wires to cut, I'm goin' for it. I can certainly appreciate your consternation when it came time to do the snip!
Edited by Squeak 2009-06-03 12:56 PM
|
|
| |
|
Tourer
Posts: 537
, FL United States | Good video... I did the 4710 mod on my trunk yesterday... I should have taken pics but I was trying to get out of the sun... |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Blue Demon,
KansasGuardsman has been running the mod for six months. Without the "blinker on" the brake lights would light anyway. It should not be an issue.
Ride Safe |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | dr_reloader,
Do you have any notes from the install of the 4710?
|
|
| |
|
Cruiser
Posts: 244
Fargo, ND | Great video, and very simple mod. I'll be snipping my wires "G" & "H" this week as well, thanks Radioteacher. |
|
| |
|
Tourer
Posts: 520
Simi Valley, CA | Great job- This takes the worry out of which wire was it again?
I do have a problem with the color coated ones, I am color blind red and green!
I will be doing the snip this weekend!
Thanks!
Tim
|
|
| |
|
Cruiser
Posts: 99
Kansas City, Ks | radioteacher - 2009-06-03 1:50 PM
Blue Demon,
KansasGuardsman has been running the mod for six months. Without the "blinker on" the brake lights would light anyway. It should not be an issue.
Ride Safe
Oh.. I don't think that the circuit will get overloaded with the cut...
I think that the mod is great, but has stated "More Lights = More Better!"
I was wondering if someone was to make the top 2 lights flashed (per side) vs just the top one to make THOSE more noticable.
Edited by Blue Demon 2009-06-03 3:43 PM
|
|
| |
|
Cruiser
Posts: 249
Montreal, QC Canada | Hey Paul......loved the video - complete with that very nice cat and birds in the background. Ken will do some snippage this weekend. Loved the sfx also.
Pen |
|
| |
|
Visionary
Posts: 3204
Memphis | I wish all six tail lights lit up with the brakes and when you turn your blinkers on, the three on the left or the three on the right side of the "V" would flash while the other side stayed steady. Here's my main beef with the stock set-up: Imagine coming to a 4-way stop and slowing down with a car right on your tail. You hit the brakes and the bottom four bulbs light up. As you stop, you decide you're going to turn right. You turn on your turn signal but don't move. To the tailgaiter behind you, it looks like you just came off the brakes because your middle brake lights just went out. He looks to the left for traffic, creeps up and, crunch, you just got rear-ended. There are a couple of instances related on this forum about Visions getting rear-ended at a full stop. I'm always on guard on my motorcycle at a full stop but I think the Vision brake-light system is confusing to the people behind it. A Tour model has 8 running lights going all the time (with the trunk) and if you turn your blinkers on, the only brake lights available are the bottom two. I've followed some Visions around for a couple of days at a time and trust me, the last place people are looking is at the bottom lights of that bike. I'd rather have two running lights and six brake lights than six running lights and two brake lights. |
|
| |
|
Visionary
Posts: 1324
So Cal | I agree, the bottom two lights are very low, something a tailgater would not see. I like the mod. I dont know about snipping though. Maybe just back the terminals out of the connector. |
|
| |
|
Tourer
Posts: 562
SC, Bluffton | Blue Demon - 2009-06-03 12:31 PM
My guess is that Victory turn those lights off to bring more attention to the ones flashing..
I agree. This is why I won't consider this "snip".
SongFan - 2009-06-03 11:25 PM
I wish all six tail lights lit up with the brakes and when you turn your blinkers on, the three on the left or the three on the right side of the "V" would flash while the other side stayed steady. Here's my main beef with the stock set-up: Imagine coming to a 4-way stop and slowing down with a car right on your tail. You hit the brakes and the bottom four bulbs light up. As you stop, you decide you're going to turn right. You turn on your turn signal but don't move. To the tailgaiter behind you, it looks like you just came off the brakes because your middle brake lights just went out. He looks to the left for traffic, creeps up and, crunch, you just got rear-ended.
I completely agree with you on both of those. Shirley  someone will come up with a way to get all 3 on one side to blick while the 3 on the other side stay steady (braked or just running).
Herb
Edited by g1nomad 2009-06-04 2:19 PM
|
|
| |
|
Cruiser
Posts: 297
VA | OK, good video, thank teach. Question, instead of buying this Kurakyn mod kit, has anyone considered trying to find a double filament buld for the trunk, and then using the existing wiring to make the trunk lights act as brake and turn signals? I haven't taken mine apart yet, but I would think that if you could find a replacement double filament buld for the trunk lights, and then tap off the lower lights, you could make the trunk mod without having to buy this 4710 kit. Just curious if anyone else has considered or done this. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | I'd like to get one of those Bus STOP signs to come up off the trunk lid as I apply the brakes. But in the scheme of things, the more red light is better and the turn is still clearly visible from the rear. The important thing is the slow down part to get them to back off of you. |
|
| |
|
Tourer
Posts: 447
Northeastern Penna. | Great video on the mod. A simple check on whether or not there might be an overload- just
check the amp rating on the fuse for the brakes lights.Divide the the total wattage of the brake lights and turn signal bulb by the 12v system. That will give you the amperage . Anyone have the
info on the watts of each bulb handy ? |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | divesharc,
You asked, "Has anyone considered trying to find a double filament build for the trunk?" and the answer is people have looked into it but there is nothing off the shelf for this yet.
Please check out this old thread.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=2287&sta... |
|
| |
|
Cruiser
Posts: 208
Wichita, Kansas | It's a 20A fuse. All the bulb info is on the wiring diagram, pg 510, maintenance manual. |
|
| |
|
Visionary
Posts: 1324
So Cal | Did the mod friday. Just backed the terminals out of the connector though and taped them up in case I want to change back later.
Edited by cjnoho 2009-06-06 7:45 PM
|
|
| |
Vision Middle Brake Light Modification - Video
