|
|
Tourer
Posts: 390
| If you have issues with the mirrors on your Vision, here is a solution...
Edited by chesshiretuna 2013-06-09 8:14 AM
(Coolhelmetdesign-3597.jpg)
Attachments
----------------
 Coolhelmetdesign-3597.jpg (50KB - 11 downloads)
|
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Too distracting for me........... |
|
| |
|
Cruiser
Posts: 87
Lusby,Md | What about riding two up? Will be looking at the wife |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | vic2004-08 - 2013-06-09 4:47 PM
What about riding two up? Will be looking at the wife
That would be a deal breaker for me, right there. :D |
|
| |
|
Tourer
Posts: 573
Central Illinois | MM I have no objection to looking at my wife, but failing to show the traffic behind me is a "critical failure". So far I am not impressed by my Vision. My Vision rear views show me the next lane of traffic fairly well. The only problem I am having is seeing what is directly behind me. If I want to see that. I must lean well out to the right or left and view my "standard" mirror images. If I move far enough to the right or left, the standard mirrors show what is directly behind me. It is not as I would expect from a well designed mirror system. It is more something that I must accommodate when riding my Victory. |
|
| |
|
Tourer
Posts: 411
Dallas, Texas | This would require wearing a helmet. Pass. |
|
| |
|
Tourer
Posts: 573
Central Illinois | I do wear a helmet in all of my riding. If that is a failure, I will always fail. I even wear a fully functional armored jacket for all riding conditions. If that is a fail with you, so be it. I intend to survive well past my other brand specific fellows by being very conservative compared to them. Iluvink, if you do not care much for standard protections there is no way that I can ever convince you to take realistic protective measures. I wish you all of the best but hold little hope of you ever having a good outcome. Riding, like so many other things, is a trade off between possible and probable outcomes. I have little chance of surviving my riding as an over 65 male tour rider. On the other hand, I think that I represent many riders who ignore age and age related discrimination when deciding what and how often to ride. Many of us ride just because we like it. We owe nothing to anyone and we thus ride our own rides. As is often the case, we over-aged riders enjoy the company of younger riders who have yet to admit that they have any ride restrictions. I encourage any and all riders to ride their own ride. Each of us must make our own choices after all.
|
|
| |
|
Tourer
Posts: 482
Beer Collins, Colorado (there is no fort) | Simple fix for me was to add some convex wedge mirrors to the upper outside corners of the stock mirrors-no one's gonna sneak up behind me again.
[IMG]http://i69.photobucket.com/albums/i44/BRIANnCOLO/IMG_0706_zps85b87efc.jpg[/IMG] |
|
| |
|
Puddle Jumper
Posts: 30
Leighton, IA | I did the same thing but then I mounted standard Vic mirrors on the brake and clutch reservoirs. Looks good and works like the original mirrors should have worked to begin with. So far, the only complaint I have about the VV is their crappy mirror design. As a matter of fact, I can't believe they got that design past DOT or NHTSB or whatever government agency has to approve stuff like that. And maybe that's one that Big Brother doesn't approve. I don't know.
In any event, the design of the Vision rear view mirror system just plain sucks and, IMHO, is totally unsafe. My recommendation, Oldman47, is to buy a set of mirrors from Vic and mount them on the reservoirs and you'll be happy. Guaranteed. |
|
| |
|
Tourer
Posts: 573
Central Illinois | Rider44, I actually have a pair of mirrors that I could use. My HD FLTRU had mirrors that I did not like, so I replaced them with other HD mirrors. If I decided to use them today, I would just need an adapter to fit my HD mirrors to my Vision. It would be fairly inexpensive. The HD to metric adapters are dirt cheap.
Edited by Oldman47 2013-06-09 10:26 PM
|
|
| |
|
Puddle Jumper
Posts: 30
Leighton, IA | I'd mount them, if I were you. If you don't like them really very little lost. But you'll find that you are no longer blind as to what is behind you. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | With the trunk off, you can see all kinds of stuff behind you. |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | What happened to the discussion about the helmet? I like the concept. |
|
| |
|
Visionary
Posts: 1365
Central Maryland | I like that helmet as well... but have yet to find a seller around here whom carries them. The only disadvantage that I would see with the Revue helmet; is that at night; headlights from cars behind you could cause an awful glare in that rear view mirror.... |
|
| |
|
Puddle Jumper
Posts: 8
Orlando | What size convex mirrors did you use and where did you get them? I like the concept and look and would like to do the same thing. |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | Here's a better solution if you have mirror issues. Just mount these puppies. Problem Solved!!
Edited by MaddMAx2u 2013-06-11 4:01 PM
(images.jpg)
Attachments
----------------
images.jpg (6KB - 0 downloads)
|
|
| |
|
Puddle Jumper
Posts: 8
Toronto, ON Canada | Oldman47 - 2013-06-09 7:20 PM
MM I have no objection to looking at my wife, but failing to show the traffic behind me is a "critical failure". So far I am not impressed by my Vision. My Vision rear views show me the next lane of traffic fairly well. The only problem I am having is seeing what is directly behind me. If I want to see that. I must lean well out to the right or left and view my "standard" mirror images. If I move far enough to the right or left, the standard mirrors show what is directly behind me. It is not as I would expect from a well designed mirror system. It is more something that I must accommodate when riding my Victory.
You probably already aware of this, however, I noticed when I pushed the mirror inboard I got a much better view of what was directly behind me and a little less of what was to the side. I take up about a 1/3 of the mirror but the view I get on the other 2/3 is great... the only problem I have is I cant see what the wife is doing and traffic in the same view....  Sometimes you need to know when she is putting up the "rabbit ears" behind your head when you think you're "stylin'
- Mal |
|
| |
|
Tourer
Posts: 340
Regina Saskatchewan Canada | Most people's mistake is turning the mirrors too far out. Turn them in and you will get a better view of what's directly behind you. |
|
| |
|
Puddle Jumper
Posts: 30
Leighton, IA | Crawford - 2013-06-12 9:16 AM
Most people's mistake is turning the mirrors too far out. Turn them in and you will get a better view of what's directly behind you.
Yes, I have to admit that I found that out.......eventually. And you're right, they do work much, much better than I originally thought.
|
|
| |
|
Puddle Jumper
Posts: 8
Orlando | I followed the post on the convex mirrors. They work great. I can now see who is next to me and who is behind me. I got the 2 inch mirrors and placed them at the top of my vision mirrors at the outside edge. |
|
| |
|
Cruiser
Posts: 55
| i turned the mirrors in and they work alot better, and I also have the adjustable spot mirrors. I rode for almost 6 months with them turned all the way out and never saw what was behind me. i still may install regular mirrors so i dont have to look at my hands anymore. The old mirror location might be a good spot to mount 6x9 speakers if you use the regular speaker location too. |
|
| |
|
Puddle Jumper
Posts: 30
Leighton, IA | Rick 106 - 2013-06-14 3:12 PM
i turned the mirrors in and they work alot better, and I also have the adjustable spot mirrors. I rode for almost 6 months with them turned all the way out and never saw what was behind me. i still may install regular mirrors so i dont have to look at my hands anymore. The old mirror location might be a good spot to mount 6x9 speakers if you use the regular speaker location too.
Now I don't feel quite to bad, Rick, because I did the same thing. Hated those mirrors. Once I pushed them on the inner/lower corners, I could see what was directly behind me. I don't really mind seeing my hands, I can ignore them. I just wanted to see what was directly behind.
So, I have to take back all I said bad about the Vision mirrors. They do, in fact, work just fine. They work so well that I've removed the handlebar mounted mirrors. No longer need them. And, as a result, I'm a happy camper. |
|
| |
|
Cruiser
Posts: 55
| I think what throws many people off is the trunk on the our models. If youre not used to that, it does take time to get used to not seeing like a naked bike or cruiser. |
|
| |
|
Puddle Jumper
Posts: 32
| Rider44 - 2013-06-14 4:20 PM
Now I don't feel quite to bad, Rick, because I did the same thing. Hated those mirrors. Once I pushed them on the inner/lower corners, I could see what was directly behind me. I don't really mind seeing my hands, I can ignore them. I just wanted to see what was directly behind.
So, I have to take back all I said bad about the Vision mirrors. They do, in fact, work just fine. They work so well that I've removed the handlebar mounted mirrors. No longer need them. And, as a result, I'm a happy camper.
Now you have your Vision mirrors angled inwards, all you need to do is mount a pair of 2" or 3" convex rotating mirrors on the top inside of your Vison mirrors, and have the convex mirrors angled outwards as far as possible. This makes use of the inner third of your mirrors where you can currently only see your hands, so you lose nothing and gain great rear and peripheral views.
They look like this....
http://www.autozone.com/autozone/accessories/Pilot-Automotive-3-3-4...
Pete
Edited by Peter Warren 2013-06-14 7:41 PM
|
|
| |
|
Cruiser
Posts: 122
Westchester Co., NY | I am not sure that the threads of the HD mirrors will match that of the Vision. I believe the mirrors need to be ones designed for metric bikes. |
|
| |
Vision Mirrors
![[IMG]http://i69.photobucket.com/albums/i44/BRIANnCOLO/IMG_0706_zps85b87efc.jpg[/IMG]](http://s69.photobucket.com/user/BRIANnCOLO/media/IMG_0706_zps85b87efc.jpg.html){kind=link}