|
|
Cruiser
Posts: 209
| i arose to 32 degrees this morn. no rain in sight. this would be my coldest ride yet. it is 530 am. i got bundled up best i could[i really need to get a cold weather suit] i seemed to be getting a lot of 'impressive looks' so i thot. when i got to work[22 miles away] i had left my saddle bag open! lol good thing nothing was in it. last time i left it open, my m/c cover was hanging out waving like a flag. i hate it when that happens lol |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | I ride all winter at 5 degrees or 9 degrees - that kind of cold. Don't be a wuss!
|
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | I prefer it to be above 32 so I know the frost on some of the roads, bridges, etc is gone but I don't have any problems starting out in the 20s. You have to dress accordingly, of course. You need to go out when it's no more than 31 just so you can officially pop your below-freezing cherry.  |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | 32 degrees is so goddamned hot - I can't even think about the bike. I get in the car and crank the A/C. When it's in the 20's - that's perfect.
|
|
| |
|
Iron Butt
Posts: 1109
| As it rarely gets into the 20's here I can't say I've ridden in the single digits, the triple digits are another matter. |
|
| |
|
Tourer
Posts: 390
| donetracey - 2012-11-17 12:51 AM
32 degrees is so goddamned hot - I can't even think about the bike. I get in the car and crank the A/C. When it's in the 20's - that's perfect.
Here we are talking Farehiet and Don is talking Centigrade.... |
|
| |
|
Iron Butt
Posts: 1109
| chesshiretuna - 2012-11-17 7:53 AM donetracey - 2012-11-17 12:51 AM 32 degrees is so goddamned hot - I can't even think about the bike. I get in the car and crank the A/C. When it's in the 20's - that's perfect. Here we are talking Farehiet and Don is talking Centigrade.... Good catch, didn't notice that. |
|
| |
|
Cruiser
Posts: 65
| The Vision is the "warmest" bike I have ever had. Best wind management, heated seats and grips! I have heated gear but only will use it if I have to ride more than an hour below freezing which doesn't happen much anymore. I moved from Minnesota to South Carolina because I hate being cold. I have been good in my Aerostich with a fleece jacket down to the mid-teens on my other bikes. I am sure the Vision will be even better!
|
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | donetracey - 2012-11-16 8:38 PM I ride all winter at 5 degrees or 9 degrees - that kind of cold. Don't be a wuss! You guys should have caught on with my first comment! Did you know that the U.S.A. is the ONLY country in the world using Fahrenheit (maybe a couple of protectorates as well) ? Also using feet and miles? 1 inch=3 barleycorns, 12 inches = 1 foot, 5280 feet = 1 mile. BRILLIANT !!! And everything you make has to be converted to metric anyway, if you want to sell it outside of the U.S. ? Like my metric Vision ? |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | We don't like doing what everyone else does, at least we didn't, I don't know anymore, si, eh. |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | varyder - 2012-11-17 12:38 PM We don't like doing what everyone else does, at least we didn't, I don't know anymore, si, eh. OUI ! I grok ... |
|
| |
|
Iron Butt
Posts: 785
Mt. Vernon, WASH. | Try maintaining (back in the day) one of the half and half SAE/Metric cars built by Ford and GM. Go work on a ROLLS MERLIN which is a gathering point for every weird type of fastener this side of crazy, B.S. Whitworth, SAE, and there's a wide difference between 5/8 British Standard and 5/8 SAE in addition to what the $NAPOFF guy get$ for B.S. wrenche$ |
|
| |
|
Visionary
Posts: 4278
| get a electirc jacket and 22 will be no biggie |
|
| |
|
Puddle Jumper
Posts: 12
Clayton, NY (1000 Islands) | Northern NY......23-29 degrees going to work this morning (34 miles). Daylight getting shorter and shorter also. Probably putting bike up till spring this weekend...sucks. Let's go April 03. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | You were 11B and you're quitting at 29*??? Shame on you. |
|
| |
|
Cruiser
Posts: 140
| He's retired. |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | Even so, once 11B, always 11B. OTOH, I was commo so I guess I wouldn't know.  |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | donetracey - 2012-11-17 3:34 PM
donetracey - 2012-11-16 8:38 PM Did you know that the U.S.A. is the ONLY country in the world using Fahrenheit (maybe a couple of protectorates as well) ? Also using feet and miles? 1 inch=3 barleycorns, 12 inches = 1 foot, 5280 feet = 1 mile. BRILLIANT !!! And everything you make has to be converted to metric anyway, if you want to sell it outside of the U.S. ? Like my metric Vision ? ?
The US should drop the inch system and adopt metric as our standard. The rest of the world should speak english. I think that would be a fair trade. |
|
| |
|
Tourer
Posts: 562
SC, Bluffton | donetracey - 2012-11-17 2:34 PM
donetracey - 2012-11-16 8:38 PM I ride all winter at 5 degrees or 9 degrees - that kind of cold. Don't be a wuss! You guys should have caught on with my first comment! Did you know that the U.S.A. is the ONLY country in the world using Fahrenheit (maybe a couple of protectorates as well) ? Also using feet and miles? 1 inch=3 barleycorns, 12 inches = 1 foot, 5280 feet = 1 mile. BRILLIANT !!! And everything you make has to be converted to metric anyway, if you want to sell it outside of the U.S. ? Like my metric Vision ? ?
I am far from a brillant man, especially reading. But metric & math have always seamed logical
to me. I don't understand why the change to metric would be difficult here?
Thank God this board told me I could use a 5/8 Hex socket to remove my front 16mm axle !!
5/8" = .0625" = 15.875mm
My original tires with 18,330 miles are officially off the bike. Rear had two tiny spots where you could
see the steel belts.
Herb |
|
| |
|
Tourer
Posts: 499
Chattanooga, TN |
donetracey - 2012-11-17 3:34 PM donetracey - 2012-11-16 8:38 PM I ride all winter at 5 degrees or 9 degrees - that kind of cold. Don't be a wuss! You guys should have caught on with my first comment! Did you know that the U.S.A. is the ONLY country in the world using Fahrenheit (maybe a couple of protectorates as well) ? Also using feet and miles? 1 inch=3 barleycorns, 12 inches = 1 foot, 5280 feet = 1 mile. BRILLIANT !!! And everything you make has to be converted to metric anyway, if you want to sell it outside of the U.S. ? Like my metric Vision ? Actually, Fahrenheit is more accurate than Celsius simply due to the smaller unit of measurement. So, Don, what else would you change here in America if you didn't have to bow to the Royal Monarchy? Do you prefer a frosty cold 16 oz. adult beverage or a pint, lol?! I prefer a yard of beer, but that's not an option here so I digress. BTW, when did Canada or any other country send a man to the moon and back. Using US Standard units of measurements? But I concede, I prefer using millimeters to inches! |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | ...man to moon and back... NASA is metric. US military vehicles are metric. SI units are much better for math/science, as mentioned above, vs SAE. Especially in thermodynamics. Speaking of SAE (a US based organization for best practices), their standards are metric. And the inch unit we use is often referred to as the english system. The English use metric.??? Why are we Americans so stubborn to change? I guess it's what makes us Americans. We are definately different than everyone else on the planet.
Edited by victoryvisiontour 2012-11-20 4:57 PM
|
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | Well, most of the rest of the world changed to metric over the past 50 years. Canada in 1970 - in spite of our nearest neighbour refusing to. If you research the history of metric in the US - the answer I saw in a number of places was that too many Americans would be unable to come to grips with the change - political reasons (politicians would be ousted by those that didn't want to change).
I recall my own reluctance, and that of friends and neighbours, but we did it - and nobody died as a result (I don't think so...). Many of us learned metric in High School years earlier - or college, so most of us knew what and why we needed to do it.
Y'all do know your speedometer can be switched to kilometers and back to miles - easily? About 80% of my riding is in USA.
|
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | Oh, and a yard of beer gets warm way to quick due to its long slender neck. So, that is not a positive for us either. I prefer the Assie oil can which is 3/4 of a liter and stays cold due to its girth. |
|
| |
|
Tourer
Posts: 499
Chattanooga, TN | VVTour, you're drinking it too slow if it's got a chance to get warm! Don, I hear you. I do like metric tools. That's all I buy. I don't think anyone still uses standard sizes, really do they? Maybe Government Motors does. |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | How warm can a beer get in 45 seconds? |
|
| |
my ride to work this morning
