You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Ride Height help
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Dwight
Posted 2014-04-11 9:17 AM (#154148)
Subject: Ride Height help


Cruiser

Posts: 116
I am trying to verify my ride height on the rear of my Vision and wanted to know what is the standard height with 30 psi. Would someone be willing to measure theirs and let me know what it is? Here is how I did mine.



(ride height.jpg)



Attachments
----------------
Attachments ride height.jpg (8KB - 4 downloads)
Top of the page Bottom of the page
Dwight
Posted 2014-04-13 4:37 PM (#154188 - in reply to #154148)
Subject: Re: Ride Height help


Cruiser

Posts: 116
Anyone want to help a brother out?
Top of the page Bottom of the page
johnnyvision
Posted 2014-04-13 6:15 PM (#154190 - in reply to #154148)
Subject: Re: Ride Height help


Visionary

Posts: 4278
shot I measured ground clearance and it was 4 inches
Top of the page Bottom of the page
johnnyvision
Posted 2014-04-13 6:19 PM (#154191 - in reply to #154148)
Subject: RE: Ride Height help


Visionary

Posts: 4278

Dwight - 2014-04-11 9:17 AM I am trying to verify my ride height on the rear of my Vision and wanted to know what is the standard height with 30 psi. Would someone be willing to measure theirs and let me know what it is? Here is how I did mine.

think about it with every one running different tire it will be different.

Beside what difference would it make. Put it at what you like with you sitting on the bike.

What ares is will not help you

Top of the page Bottom of the page
Dwight
Posted 2014-04-13 6:25 PM (#154192 - in reply to #154191)
Subject: Re: Ride Height help


Cruiser

Posts: 116
I meant the air shock is at 30 psi. I am just trying to keep from breaking my bags when running 2 up. Thanks
Top of the page Bottom of the page
Oldman47
Posted 2014-04-14 12:48 AM (#154200 - in reply to #154192)
Subject: Re: Ride Height help


Tourer

Posts: 573
Central Illinois
Read the sticker on your bike and pump up your air pressure to match the load. 30 psi is really low pressure for 2 up riding.
Top of the page Bottom of the page
Dwight
Posted 2014-04-14 8:21 AM (#154211 - in reply to #154148)
Subject: Re: Ride Height help


Cruiser

Posts: 116
I know it is low for 2 up, what I was hoping to find out is what is the standard ride height of a normal height suspension at 30 psi in the air shock. Then I will compare it to mine just to see if my bike is an inch lower in the rear or not. I adjusted my suspension rod and I was trying to make sure I only dropped an inch without pulling the rod out to measure...Dwight
Top of the page Bottom of the page
johnnyvision
Posted 2014-04-14 6:44 PM (#154247 - in reply to #154148)
Subject: Re: Ride Height help


Visionary

Posts: 4278
Not the truth comes out.

Victory say ground clearance on stock bike is 5.8 inch. Guessing they measure from bottom of motor to ground. Like I said mine is 4 inches and yeas I lowered mine 2 inches
Top of the page Bottom of the page
Dwight
Posted 2014-04-15 8:12 AM (#154256 - in reply to #154148)
Subject: Re: Ride Height help


Cruiser

Posts: 116
That will work, thanks Dwight
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™