|
|
New user
Posts: 3
| I have 2013 ness vision. My question is are the wheels clearcoated? Just don't want to use the wrong cleaner. Recommendations? |
|
| |
|
Tourer
Posts: 482
Beer Collins, Colorado (there is no fort) | Try cleaning a small spot with some good polish like Flitz, it won't hurt a clear coat finish if that's what's there. If the polish cloth turns black you've got raw billet aluminum. |
|
| |
|
New user
Posts: 3
| Ok thanks. I'll try that out. |
|
| |
|
Cruiser
Posts: 170
Barrington, NH | no coating, polished billet from the factory. |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Will never get billet wheels again. Had some Ness Sweeper wheels on my Vegas and now Evil 7's on my Vision. You have to polish and apply a protectant every six months to keep them looking good. Forget the rear wheel on the Vision. I can't even wash it without getting horizontal other than laying the bike over. Only polish the rear when it comes off the bike for a tire. Complete PIA! |
|
| |
|
Cruiser
Posts: 170
Barrington, NH | Yup, powder coat or chrome is less of a hassle but I have ness Evil7s that were chromed and the chrome started to bubble, same with a buddy of mines Battistini? wheels... maybe it's a Ness thing...
Edited by Chico7z 2016-02-22 2:36 PM
|
|
| |
|
Visionary
Posts: 4278
| with Mothers Power ball and drill wheels are a snap
https://www.youtube.com/watch?v=iG3cVHCF1yg |
|
| |
|
Puddle Jumper
Posts: 23
Longmont, CO | I just got mine back from the chromers. You can read about the job in detail HERE! Here's a teaser shot.... 
Edited by TheMike 2016-03-28 7:55 PM
|
|
| |
billet wheels
