You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 12
| I have a 2013 VV. Sadly, I had an accident and am in the process of replacing all of the front fairing pieces.
I need to find 2 of the wiring harness connectors (male) that plug into the turn signals (same connector is probably used many more places on the wiring harness). I have the female connectors that hold the turn signal bulbs.
Anybody know where I could buy the wiring turn signal harness connectors for a 2013 Vision?
If not, there are a few 08 main wiring harnesses on eBay. Anybody know if the 08 used the same connectors?
My last option is to solder wires to the leads in the female connector but I'd rather use the original connector from the wiring harness.
Comments/suggestions?
Thx, |
|
| |
|
Visionary
Posts: 4278
| maybe here not sure if 13 is the same as 08 or ebay
http://pinwallcycle.com/advanced_search_result.php?osCsid=k3bgk8a88... |
|
| |
|
New user
Posts: 1
| I have both front turn signals and a rear harness. The rear connectors are the same as the front. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Are you referring to this item here ?
http://www.amazon.com/acdelco-pt2782-original-equipment-multi-purpo... |
|
| |
|
Puddle Jumper
Posts: 12
| Awesome! Sure looks like that's the right one. I'll order it and find out.
Thanks again,
Mike
|
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | From what i understood.. that part along with the part that holds the bulbs are GM parts.. btw. your welcome. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Front turn signal connectors
