You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 10
Las Vegas, NV United States | I know I should have a owner's manual but I don't. Now that my wife and I both own 2011's I need to get one. So, my question. In the owner's manual, is there any mention of how often the bolts that hold the pulley to the wheel should be inspected and/or torqued? If you saw my previous post in general discussion, you know I had 1 back out enough to damage the swingarm and another was 2 turns loose. My dealer is trying to help me out, my "bumper to bumper" warranty was denied. Don't know how. Any input would be greatly appreciated. My bike is an 11 Vision Tour but I think most Victory's have this drive set up.
Thank You!!! |
|
| |
|
Visionary
Posts: 4278
| check when you get a tire. Most shops have to pull the pulley to get it in there tire machine.
if you re torque you destroy the original torque |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Yeah like Johnny said .. check when you get a new tire.. I know when I install a new tires I have to take the pulley off.... also when I owned you 2008 vision I learned real quick to read what the warranty covers .. I had a rear rotor denied .. |
|
| |
|
Puddle Jumper
Posts: 10
Las Vegas, NV United States | These are the original tires so the pulley bolts should never have been touched. Does anyone have a copy of the owner's manual that specifically states these bolts are not to be touched?? I would like a copy of that if possible.
Thank You |
|
| |
|
Visionary
Posts: 4278
| scroll down fill in the blanks
http://www.victorymotorcycles.com/en-us/owners-manuals |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Question on pulley bolts
