You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




HID replacement
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
a99miata
Posted 2014-08-08 11:40 AM (#164067)
Subject: HID replacement


Tourer

Posts: 423
northwest florida
Has anyone replaced the halogen h bulbs with HIDs? Other than a pain getting to the bulbs should be a easy mod. Or maybe an LED replacement in Cyclops? just wondering.
Top of the page Bottom of the page
johnnyvision
Posted 2014-08-08 6:21 PM (#164073 - in reply to #164067)
Subject: Re: HID replacement


Visionary

Posts: 4278
The cyclops bulb is HID https://victoryhid.com/s/
Top of the page Bottom of the page
Arkainzeye
Posted 2014-08-08 9:03 PM (#164074 - in reply to #164067)
Subject: Re: HID replacement


Visionary

Posts: 3773
Pittsburgh, PA
someone recently told me that the reflective surface for a standard H bulb is not optimal for a HID bulb... i swear i heard this some place else as well..
Top of the page Bottom of the page
Arkainzeye
Posted 2014-08-08 9:11 PM (#164076 - in reply to #164067)
Subject: Re: HID replacement


Visionary

Posts: 3773
Pittsburgh, PA
HID Plug-n-Play Kits use halogen style bulb bases (H13, H7, 9007...etc.) that utilize your stock halogen unit for light control. This is NOT the correct way to achieve high performance lighting. This in fact creates excessive glare, un-desirable light patterns & can be dangerous!

Halogen Reflector
A factory halogen reflector housing uses a specific focal point & reflector design to control light output. This design is based around a halogen bulb's 360 degrees of light output or illumination. A halogen bulb creates 360 degrees of light due to it's use of a filament.

HID bulbs have no filament for their light output. Light is created by an arc igniting gases inside the bulb capsule. When an HID bulb is lit or on, it also doesn't emit light in a 360 degree pattern such as a halogen bulb. The light output is more of a controlled pattern with the brightest light (off-white/ slight yellow) being emitted downward & center, and the slightly less bright light (whitish/blueish) being emitted at the ends of the arc.

Essentially a Plug-n-Play Kit takes an HID capsule and fits it onto a halogen style bulb base (H11, H7, 9004...etc.). When these kits are used in a halogen headlight setup, the control over light output is severely diminished. "Hot-Spots", glare & an un-desirable beam pattern are usually the end results.

http://www.hidretrofits.com/
Top of the page Bottom of the page
Arkainzeye
Posted 2014-08-09 7:46 AM (#164081 - in reply to #164067)
Subject: Re: HID replacement


Visionary

Posts: 3773
Pittsburgh, PA
http://www.reddit.com/r/cars/comments/1nih24/a_guide_to_hidxenon_li...
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™