You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Looking for replacement connectors
Jump to page : 1
Now viewing page 1 [25 messages per page]		View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Derks
Posted 2016-09-26 9:38 AM (#189064)
Subject: Looking for replacement connectors


Puddle Jumper

Posts: 34
Bloomfield, NJ United States		I am looking for the manufacturers and part numbers for the pictures of the connectors I have attached to this post (2 views of each). They are using in the trunk lid. If anybody can help me, I'd appreciate it.



(PIC1.jpg)



(PIC2.jpg)



(PIC3.jpg)



(PIC4.jpg)



Attachments
----------------
Attachments PIC1.jpg (34KB - 0 downloads)
Attachments PIC2.jpg (41KB - 0 downloads)
Attachments PIC3.jpg (32KB - 0 downloads)
Attachments PIC4.jpg (31KB - 0 downloads)
Top of the page Bottom of the page
johnnyvision
Posted 2016-09-26 5:52 PM (#189070 - in reply to #189064)
Subject: Re: Looking for replacement connectors


Visionary

Posts: 4278
go to NAPA the connectors are from the car world
if this is on a 2016 go to dealer ask them
Top of the page Bottom of the page
Oldman47
Posted 2016-09-27 7:07 PM (#189098 - in reply to #189064)
Subject: Re: Looking for replacement connectors


Tourer

Posts: 573
Central Illinois		You can also buy automotive style connectors on line here.
www.mouser.com
Top of the page Bottom of the page
Arkainzeye
Posted 2016-09-28 8:07 PM (#189104 - in reply to #189064)
Subject: Re: Looking for replacement connectors


Visionary

Posts: 3773
Pittsburgh, PA		2 different times i have noticed when i needed a connector like you , the ones i got from napa were actually used for or made by 1)GM or recently 2) FORD..
Top of the page Bottom of the page
Derks
Posted 2016-10-05 2:22 PM (#189198 - in reply to #189104)
Subject: Re: Looking for replacement connectors


Puddle Jumper

Posts: 34
Bloomfield, NJ United States		Per your suggestion, I found the grey one is used on older GMs. They are supplied with pigtails. They want between $30 and $40 each. Now I have to find out who makes the connector for them. If I purchase the connector in pieces it should cost under $5 each.

Edited by Derks 2016-10-05 2:23 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™