You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 17
| While changing my throttle body assy, it all came apart. I finally took it to a dealer to put the puzzle back together and now the throttle is stiff and will not return to "zero" on the handgrip. The dealer said I need a new cruise control cable because that is what makes the throttle return. I also have to say that it worked fine before changing the throttle body. There is a lot of slack in that cable now. I was going to take it off but it didn't want to come off of the cruise module and I didn't think I should pull it too hard in fear of tearing it up.
I thought that the springs on the assy was what caused it to spring back like on any other carburetor?
I don't really want to waste more money at a dealership as it seems like it should be a easy fix. Anyone have any ideas? Thanks!
|
|
| |
|
Cruiser
Posts: 133
, AR United States | Do you have the service manual? http://www.mediafire.com/file/ek56e8qqk4id6yk/2010+Victory+... |
|
| |
|
Puddle Jumper
Posts: 17
| yes I do. It has 1 picture and that is it! I did find another custom shop that I am going to take it to. Maybe they can fix
it |
|
| |
|
Puddle Jumper
Posts: 17
| yes I do. It has 1 picture and that is it! I did find another custom shop that I am going to take it to. Maybe they can fix
it |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Throttle Assembly help
