You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 5
| Looking for a wire diragram to adding a amplifier and speakers. Already have JL 6 1/2 speakers. Rockford Fosgate amplifier |
|
| |
|
Cruiser
Posts: 155
Victoria Tx, TX United States | Go to Victory website... And they have the Shop manual on there. I found it after I bought the manual |
|
| |
|
Cruiser
Posts: 167
, OH | Here ya go. This is how I did mine. Fosgate 6 1/2's in the factory spot minor widen of the hole with a dremel. minor speaker trim. COMPLETE how to and wire diagram. I hope my pain makes it easy for you.
http://www.thevog.net/threads/2008-victory-vision-sound-upgrade.279... (wire diagram in part 1)
http://www.thevog.net/threads/2008-vision-sound-upgrade-continued.5...
|
|
| |
|
Cruiser
Posts: 167
, OH | your answer without searching all my crap.
The amp allows high level inputs that also double as remote turn leads on for the amp.
The front factory speaker wires can be removed from the front speakers and rerouted back to and connected to the front input of the gas tank mounted amp. Run new wires out of the amp back to the fronts speakers.
VISION- Speaker wires located under console. The big plug coming out of the radio. -
Left Front Speaker Positive - Brown/Red
Left Front Speaker Negative - Brown/Black
Right Front Speaker Positive - Gray/Red
Right Front Speaker Negative - Gray/White
Left Rear Speaker Positive - Orange/Red
Left Rear Speaker Negative - Orange/Black
Right Rear Speaker Positive - Pink/Red
Right Rear Speaker Negative - Pink/Black
Edited by icemann 2014-10-26 6:32 AM
|
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
upgrade stereo
