|
|
Cruiser
Posts: 164
Quad Cities, IL | Ok so now I am curious, if I were to bag on the 4710 mod for the sequencing lights...Can you sequence the lights from Top down rather than down up? Not sure why but that is how I envisioned it in my head before I saw the video (which I struggled with until it was on e-bay).  I imagine others might be curious about this too. |
|
| |
|
Cruiser
Posts: 146
| I certainly am!!! I LOVE this mod and it is now 1st on my list (as soon as I can become informed about what will happen to my 4710 run/turn/brake controller)?? I would really like to keep my 4710 due to the activation of the upper (trunk) lights. IS there a way to combine the two to keep the safety features of both?? |
|
| |
|
Iron Butt
Posts: 741
Central New York | Updated modification. Because of so many inquiries I had added a wired in pigtail for hooking up trailer lights. (I would still recommend a trailer isolation module) The taps could also be used to tie in resistors for those that choose to go with LEDs. (I supply no input as to what those resistors should be) I believe the taps could also be used to drive the 4710 mod for the trunk. (The 4710 would only be driving the trunk, taillights would still be per my mod) |
|
| |
|
Iron Butt
Posts: 741
Central New York | FYI Apparently EBay has some kid of promotion going on. I was made aware that they have a 10% off coupon on the mod listing. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300551438865&ssPageName=STRK:MESELX:IT Can't tell you the details as it has nothing to do with me.
|
|
| |
|
Cruiser
Posts: 146
| Cool, thx for the info on the 4710 glighto11. I might very well be interested since this is the case. |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | I just ordered. I know it is Sunday, but is it in the mail yet? |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | Gary, even though I was joking, you had sent me the shipping info on Sunday night! Awesome service.
Installation was straight forward, but I had to remove the one relay (forward one) as it had a wire clamp on it. Removing the relay wasn't that bad at all. This entire project took me about 1.5hrs + I cleaned the rear bumper, waxed the M piece and re-rerouted some wires.
For those that did KansasGuardsman bike light mod, you WILL have to undo this and put it back to stock. I'll be busting out the soldering iron tomorrow and finishing this up (I just have to solder and put the seat back on). |
|
| |
OK - It's Here
