whojndfan - 2018-08-13 9:20 PM I'm new to the bleeding because I'm tired of taking my 09' in and having the shop do it. I've read the prior posts and looking forward to doing this myself. Can you assist in taking a pic of the correct bleeder of the front caliper. Thanks First get brake fluid and hose that will fit over bleeder nipple all so get box end wrench for nipple and bottle to catch fluid. Now turn the bars to left. Hook up hose to bleeder. Sit on floor. Pump rear brake pedal and hold down. Open bleeder. Close bleeder after fluid comes up. Let pedal up. Now repetet. Till firm pedal. Then check fluid in master sylinder. Now brake fluid is only good for 2 to 3 years. Replace with dot 4 don't for get handlebar mastercylinder. To change rear brake fluid you need help. Empty master cylinder use turkey baster. Fill with new fluid. Get someone to pump pedal and HOLD DOWN. Open bleeder let fluid out. Close bleder. Now tell helper to let pedal up. Keep checking master cylinder for fluid DON"T let it run dry. Repete above stepts. Not sure if there is a 09 manual so use a 08 download to your computer https://www.mediafire.com/folder/aoq581k2ab25z/Victory_Manuals | 
rear brake
