You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 27
Lusby, MD | On occasion, seems like when the bike is hot from riding, the bike "squeels" a bit when I release the clutch, in a bigger load situation (two up, or on an incline).
So, using the $60.00 service manual for my 08 VV Tour Premium, I did the belt tension check, and it was right on (1 1/4" +/- 1/16"). However, in reviewing the riders manual, it states that the belt tension, measured the identical way, after break in should be half this number (15/32" +/- 1/64").
Any suggestions? Am I missing something? |
|
| |
|
Iron Butt
Posts: 802
| The tension spec was loosened up a couple of years after your owner's manual was printed. It is now 32 mm +/- .5mm (1 1/4" +/- 1/64) with 10 lb force.
Marc |
|
| |
|
Puddle Jumper
Posts: 27
Lusby, MD | Thanks Marc. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Belt Tension
