You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




New Vision Center Stand
Jump to page : 1 2
Now viewing page 2 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
welo
Posted 2010-06-04 1:59 PM (#61507 - in reply to #61505)
Subject: Re: New Vision Center Stand


Puddle Jumper

Posts: 9
Ignore my previous post; I see that Travelin Man has the Polaris stand.
I would be interested though in hearing if anyone has experience with a Park-n-move. I have one that works with my ST1300 and would entertain buying the center stand for the Vision if they worked together.


Edited by welo 2010-06-04 2:02 PM
Top of the page Bottom of the page
Travelin Man
Posted 2010-06-04 9:18 PM (#61526 - in reply to #47705)
Subject: Re: New Vision Center Stand


Iron Butt

Posts: 721
For those here that are interested, I did have clearance issues when doing very tight left turns.

That said, I had my dealer remove my stand and even got Victory to give a full credit for it because the stand was with weakest piece of crap I have ever seen. After one of my first rides this spring I went to put the Vision up on the center stand and as it came up over center the stand twisted and it took all my strength to hold the bike from falling over to the right side. Victory apparently thought it was defective so they were crediting my dealer with the purchase price and I told my dealer to keep the stand and just use the credit to cover the cost of removing the bent one from my bike (4 hours of labor).

I have since gone back to using my Condor front wheel chock to park the bike vertical when I need to have it vertical to do maintenance on the ground, for other maintenance I have a full table lift with a wheel vise that I use to raise it up to a comfortable working height.
Top of the page Bottom of the page
Arkainzeye
Posted 2010-06-05 8:28 AM (#61537 - in reply to #47705)
Subject: Re: New Vision Center Stand


Visionary

Posts: 3773
Pittsburgh, PA
is there anyone out there that liked the stock victory center stand? sounds to me like they Dropped the ball on this one.. designed it withOut testing it...

remember when they designed the cup holder and the pieces DIDNT fit each other.. LOL did anyone even bother tryin to assemble one at the factory.. LOL took months and months for them to resolve that mistake
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 2 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™