You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 219
Pittsburgh, PA | I bought a set of foot pegs for my vision from ebay and got them $125.00 and knew that they were slightly used. I installed them today and the peg is sloppy in the brace. I'm guessing that the spring washer was not installed by the guy I got them from. So the peg bounces and vibrates in the mount and will not stay in the up position. The pegs on my V92C does have spring washers around the mounting bolt. Is this the same way it should be on the vision? Does anyone know what size spring washer to use? and am I calling those little round springy washers the right name?
I'm 6ft3 and the new pegs allow be to rest my foot top off of the floorboards but it is uncomfortable to place my entire boot so far out to the side. Not really what I looking for. At least I didn't pay full price on them. |
|
| |
|
Tourer
Posts: 466
Grand Cane, LA | Some call them spring washers, others call them "D" washers. You can find them on just about any accessory website and at your local bike shops for pretty cheap. Have you tried looking at the brackets they sell at Arizona Victory's website? At 6'3", you will find that these will be a better fit for you. They are listed as the tall rider brackets. I have them and they work great. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
highway foot pegs
