You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Puddle Jumper
Posts: 5
Florissant, MO United States | I have a 2015 Vision with a VFC3 currently running front and top filters, timing wheel at +4, Miller standard mufflers. Looking to get a used PCV that the owner had setup with a big bore kit and cams. What tune should I download just to get me started? Not sure when I will get it on and to a dyno tuner. But would like it to have it on and running when I take it. It will be the 19-006 model. I was looking at the list on their website and of course there isn't an exact match. |
|
| |
|
Visionary
Posts: 1632
Jasper, MO | Personally, given your mods, I would just keep the VFC3. If the VFC3 is tuned correctly, you'll see no benefit from going to a PCV, other than the possibility of adding a higher rev-limit.
Ronnie |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
PCV Tune
