You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




VISION PRODUCTION NUMBERS?
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
bobbybhb
Posted 2008-02-07 8:32 AM (#5010)
Subject: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 136
CALGARY ALBERTA
I wonder what Victory has forecasted for production of the Vision for 08?
Top of the page Bottom of the page
Big Vic
Posted 2008-02-07 5:37 PM (#5030 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Iron Butt

Posts: 619
Southeast Iowa
Victory does not like to share that information and are fairly tight lipped about it. I know 2 dealers really well and niether one has any info. When I was on a factory tour I tried to get some info out of the tour guide (their MCR Manager) When I asked how many they built per day she said they don't release that kind of information. About ten minutes later I asked her if they practiced Lean. She proudly said "Yes we do." I asked her if she knew what Takt Time was. Once again she proudly said "Yes I do". I then asked her what the Takt Time of the line was. She smiled at me and said "Now if I told you that, you could figure out how many we produce each day". I smiled back at her and said "Yes I could" Danm, she was smarter than I thought!
Top of the page Bottom of the page
bobbybhb
Posted 2008-02-07 6:17 PM (#5032 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 136
CALGARY ALBERTA
Well if we use some Takt (tact) here we could for instance find out the numbers for the first production Vision and quest for the last number for 08 via this site.
Nice try though with the MCR manager. Maybe a couple of beers at the local Victory employees hangout.

Top of the page Bottom of the page
SongFan
Posted 2008-02-07 6:27 PM (#5035 - in reply to #5010)
Subject: RE: VISION PRODUCTION NUMBERS?


Visionary

Posts: 3204
Memphis

Based on the snooping around I've done, I think if you said 1,500 '08 Visions made you would not be far off.

 

Top of the page Bottom of the page
VisionTex
Posted 2008-02-07 10:26 PM (#5046 - in reply to #5035)
Subject: RE: VISION PRODUCTION NUMBERS?


Visionary

Posts: 1484
LaPorte,Tx.
Question, do you think the last four digits on the serial number is the number of Visions produced? If that is the case, I know Pollolittle has an early one, 0699 from an earlier thread, I have 3994, I saw1209 in Arkansas during the BBB rally in October. I saw 4218 at my dealer when I bought mine in December. So if they are, then I figure Victory is making about 200 a week.
Top of the page Bottom of the page
ez chair
Posted 2008-02-07 10:50 PM (#5048 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 111
Maine
Mine was delivered first week in OCT. 1643 That would place it in week 8 of production. I heard the premiums were delayed because of the chrome fork issue.
Top of the page Bottom of the page
cjnoho
Posted 2008-02-07 11:46 PM (#5050 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Visionary

Posts: 1324
So Cal
I read in a financial site, in july, that pre orders were around 3500. That wasnt sold units, just dealer orders.
Top of the page Bottom of the page
bobbybhb
Posted 2008-02-08 7:35 AM (#5056 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 136
CALGARY ALBERTA
That would be good number to go buy. If they produce 3500 in the initial run, it would make for good coverage across the network. Do you remember where you read it?
Bobby B
Top of the page Bottom of the page
LIVV
Posted 2008-02-08 8:52 AM (#5060 - in reply to #5046)
Subject: RE: VISION PRODUCTION NUMBERS?


Nalcrest, FL United States
Mine is 2510. mid. 12/07 delivery
Top of the page Bottom of the page
Spock
Posted 2008-02-08 10:19 AM (#5064 - in reply to #5010)
Subject: RE: VISION PRODUCTION NUMBERS?


Tourer

Posts: 495
Carrollton, TX
Back in the November I was told by a person who had just left Victory who would know that they planned to manufacture between 3,300 and 3,500 Visions for the 2008 model year. In December I was told that demand was greater than they had expected so they make plan to increase this production range.
Top of the page Bottom of the page
mike s
Posted 2008-02-08 2:53 PM (#5077 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 223
Valdosta, GA
Mine was delivered to the dealer at the end of September and it's 002035. It was one of the first five dealerships to receive them and I was one of the first 5 people to take delivery.
Top of the page Bottom of the page
MRG
Posted 2008-02-08 4:13 PM (#5080 - in reply to #5010)
Subject: RE: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 76
Picked mine up around the second week in December and my number is 4141.
Top of the page Bottom of the page
bobbybhb
Posted 2008-02-08 5:56 PM (#5081 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 136
CALGARY ALBERTA
I asked the administrator in the welcome column if we could set a registration of Visions and follow them. If we have 3500 or more being produced this year it would be a good topic to start off a conversation of when your machine was made and follow the series and the changes as they make them.
Bobby B
Top of the page Bottom of the page
cjnoho
Posted 2008-02-09 12:57 AM (#5101 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Visionary

Posts: 1324
So Cal
Mine is 2903. I read the order figures (I think) on yahoo finance right before polaris released their earning (aug?) I dont think that includes the demo bikes. I wonder about the VIN's on the demo's. Would they have regular production numbers? Its something to consider.
Top of the page Bottom of the page
bobbybhb
Posted 2008-02-09 9:41 AM (#5118 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 136
CALGARY ALBERTA
The test bikes would depend on pre or post production. I believe that pre production bikes don't have regular serial numbers and are known as mules or test mules. In trying to read the numbers listed here already it would be more beneficial to know the build date to determine if there is sequence.
BOBBY BB
Top of the page Bottom of the page
ez chair
Posted 2008-02-09 10:39 AM (#5123 - in reply to #5010)
Subject: Re: VISION PRODUCTION NUMBERS?


Cruiser

Posts: 111
Maine
My dealer told me that Victory uses a running number system. So the number represents the sequence of all Victories on the line not just visions.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™