|
|
Visionary
Posts: 3204
Memphis | 
Lloyd actually did six pulls but I thought he was done after the third one and had wandered off to let people analyze the printout. The reason these cams get better mileage is because I can now run the same speeds with the next higher gear. The max speed limit around Spirit Lake is 55. Pre-cams I would never shift to 6th until 60mph because it felt like I was lugging the motor. Now I can shift to 6th at 50 mph and the engine doesn't lug and there is no drive train lash. My mileage around here pre-cams was about 45.5. I'm now getting 48.5 because I'm in 6th all the time. In 5th gear I can now go down to 30 mph and roll out of it easily. This also means much less downshifting in the twisties. My mileage on the interstates coming from Memphis to Spirit Lake was right at 39 mpg. Will post an update on the difference when I get home next week. If I had done the rev-limiter bypass the HP curve would have continued on that path all the way to 6400 PM. Would have been over 115. I didn't do it because I need something to save me from myself right now. Stage 1/Level 1. 43,000 miles.
Edited by SongFan 2010-08-21 7:19 AM
|
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | Hey Mike which level Cams do you have installed??
Coop |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | show off -  |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Very good, I love dyno videos.................. |
|
| |
|
Tourer
Posts: 415
| Should have done the rev extender. The bikes rev wayyyy to fast with the cam package.
Have to be careful especially in first and second or you bang the rev limiter a lot.
I have not hit it once since he changed mine over.
Plus the gearing is different, first and second are more like other bikes. Not so low geared, get an extra 10MPH out of each. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | Because of the fuel curve I'm guessing ur running a vfc3? Is that right |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Anyone else have any full pull dyno video's, it's one way of hearing how different pipes sound......... |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | Tom, we have the same numbers. I was 109 too. |
|
| |
|
Cruiser
Posts: 162
Northern NJ | Wow, that's great! Thanks for posting that. |
|
| |
|
Visionary
Posts: 3204
Memphis | I'm running Stage 1/Level 1, VFC III, intake plate, VMC 1 cams, 43,000miles. Those are the exact same numbers VisionTex pulled with the same set-up later in the day. A guy with a 2010 Vision, Thundersticks, cams, VFC III and intake plate pulled about 105 HP and 112 torque. He wanted the rev-extender but Lloyd doesn't have the software code from Victory yet. Can only rev-extend '08/'09's. It took me three years to get the cams. Not having the rev-extension will give me something to shoot for next year. Just between me and you guys, my wife doesn't know I got the cams. :-) |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | 4 means of communications - television, telephone, telegraph, telepollolittle --- does he know your wife? |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | varyder - 2010-08-21 9:43 PM
4 means of communications - television, telephone, telegraph, telepollolittle --- does he know your wife?
She also knows his Vision-riders.com account and password! |
|
| |
|
Visionary
Posts: 3204
Memphis | I ain't skeered. (But if you find me chopped up in the freezer, don't believe the suicide note.) |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | LOL... You should tell her that you had major safety concerns with merging with traffic and needed more power to feel confident.  |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | ScoreBo - 2010-08-22 11:23 AM
LOL... You should tell her that you had major safety concerns with merging with traffic and needed more power to feel confident.
Alas! I found my excuse, I mean the justification to get cammed! |
|
| |
|
Visionary
Posts: 3204
Memphis | Here's how it will go down. I'll take her for a ride, out to dinner and when I hit the onramp, I'll turn around and yell "Wow Baby, are you losing weight!? Doesn't even feel like you're back there!" It's all in the presentation. |
|
| |
|
Iron Butt
Posts: 669
Peachtree City, GA | Nice - Good luck with that!
I know what my wife would say.
|
|
| |
|
New user
Posts: 2
| Where did the chrome on the side bags come from? Thanks |
|
| |
|
Visionary
Posts: 3204
Memphis | PM sent. |
|
| |
|
Puddle Jumper
Posts: 24
Eagle Mountain, Utah | Hey Songfan, I think you are referring to my vision. LLoydz's dyno my came to 110 and 114, after the rev limiter it should go to 115/116 or so. Here is the chart.
(lloydz's dyno.jpg)
(lloydz's dyno.jpg)
Attachments
----------------
 lloydz's dyno.jpg (80KB - 1 downloads)
lloydz's dyno.jpg (80KB - 0 downloads)
|
|
| |
|
Visionary
Posts: 3204
Memphis | Hey Vin, That was definitely you. I never saw the final results, just saw one pull with 112 on the screen. Be interesting to see what the torque does with the rev-extender. You have a real beast there from 3000 on. (The sound ain't too shabby either!) |
|
| |
|
Puddle Jumper
Posts: 24
Eagle Mountain, Utah | Thanks, Tom.
How was your ride home, and it was my pleasure to finally meet you.
Vinh. |
|
| |
|
Visionary
Posts: 3204
Memphis | Ah, Vinh (with an "h", got it.) The ride home was heaven. Never even turned on the radio. Rev-extender for me next year. I have a feeling I won't be calling it the "No Tickets Tour". Look forward to hooking up again someday. |
|
| |
|
Visionary
Posts: 2300
Georgia, west of Atlanta | Anyone know what brand and model video camera was used for that video ?? The pic quality was very good and more importantly for motorcycle videos the sound quality was great ...................I want to get one............. |
|
| |
|
Visionary
Posts: 3204
Memphis | Three year old Canon Elph digital camera set to Video mode. I also used it to shoot the Push Mountain video on the home page. I like it because I can turn it on, shoot one handed and tuck it away in a pocket very easily. |
|
| |
Lloydz Cams Dyno Run Video
