|
|
Cruiser
Posts: 65
Newburgh,IN | Hey Gang:
Has anyone came up with a cover for the Dash to stop the windshield reflection yet?
Thanks |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Black paint or cover the dash panel with a dark colored plastic. If you are talking about the instrument cluster bezel you can try black paint on it as well. |
|
| |
|
Tourer
Posts: 367
Cottage Grove, Mn | I painted mine the same color as the bike, it looks good and solved the problem.
Ride Safe |
|
| |
|
Tourer
Posts: 412
Fargo, ND | Excellent idea for someone to start making. I had one on my Wing that some industrious Wing Rider saw a need and started making them. I think he ended up being a pretty busy camper with his side venture. I'd buy one in a minute if I could find one for the Vision! |
|
| |
|
Tourer
Posts: 301
Buffalo Grove,Ill | What happens if you just put a mild tint on the windshield ? Like in a car. |
|
| |
|
Cruiser
Posts: 83
Lexington, North Carolina | I've covered mine with black 3m wrap that's used to wrap cars. There are some photos in the gallery. There's a slight pattern to the wrap that some say give it a bit of a carbon fiber look. There have also been someone that wrapped theirs with a printed pattern wrap that you can pick up in some auto supply stores. |
|
| |
|
Iron Butt
Posts: 965
New York State | Tom did you remove your dash to cover it ? |
|
| |
|
Cruiser
Posts: 83
Lexington, North Carolina | Yes, it's very easy to remove, and once off it was pretty easy to apply the wrap. |
|
| |
|
Tourer
Posts: 506
Woodland Hills, CA | Like others, mine is painted black to match my bike, and I have never had a reflection problem. |
|
| |
|
Iron Butt
Posts: 1158
Richmond, Virginia | FYI you can have your dealer order the black version from VIC that goes on the Ness Vision. Problem solved. |
|
| |
|
Tourer
Posts: 550
Tacoma, WA | I powdercoated mine black. I would do it again in a heartbeat. No problems at all with glare-----Metalguy |
|
| |
|
Cruiser
Posts: 65
Newburgh,IN | Thanks Guys, I really don't want to paint my console. There has got to be an easier way. I need to make a pattern that will cover it & cut out some type of thin rubber that will stay there. |
|
| |
|
Tourer
Posts: 301
Buffalo Grove,Ill | Well you could tape a piece of cardboard over it . |
|
| |
Cover For Vision Dash
