|
|
Cruiser
Posts: 115
Columbus, Ga | Want to know how much is a good price to powdercoat all the alluminum panels black. I am about to get this done and have no idea what to expect.
thanks |
|
| |
|
Iron Butt
Posts: 1158
Richmond, Virginia | It depends on several factors such as.
1. Reputation of your painter
2. Quality of the paint he will be using.
3. How many coats is he expecting to apply
A good powdercoat is not going to be cheap. Problem is, most people dont know good from bad to look at it. If you are getting all of the stock aluminum powder coated your price should be around 1800.00 to higher. If you have some jack leg doing it all for 500.00,, run,
or just keep my name in your file because i have all of my original aluminum parts boxed in my storage unit,,, you can buy them to replace what he did. Good luck, tell us how it goes |
|
| |
|
Tourer
Posts: 390
| Prices vary in differant locals. Have several places quote pricing. Color will also be a factor. My bike is black wich is more common. The other colors are going to be harder to match. That is where you can spend as much as 500.00 for the powder to color match. The other option is to wet paint with the factory paint that is available. I ride with a midnight cherry Vision owner who did this and the bike looks nice. |
|
| |
|
Cruiser
Posts: 251
| I am on Vancouver Island, BC, Cda and I just got my console cover and GPS mount done. It cost me their min charge which was $40. |
|
| |
|
Cruiser
Posts: 106
Illinois | VaParadox - 2010-04-20 8:49 PM
It depends on several factors such as.
1. Reputation of your painter
2. Quality of the paint he will be using.
3. How many coats is he expecting to apply
A good powdercoat is not going to be cheap. Problem is, most people dont know good from bad to look at it. If you are getting all of the stock aluminum powder coated your price should be around 1800.00 to higher. If you have some jack leg doing it all for 500.00,, run,
or just keep my name in your file because i have all of my original aluminum parts boxed in my storage unit,,, you can buy them to replace what he did. Good luck, tell us how it goes
I deal with Powder painters everyday and have done so for 20 years. We send parts out for powder and wet painting all day every day. How many coats? Never heard that when talking about powder. 1800.00? You are way off. Black powder coat on all the aluminum panels should not cost more than 300.00 for a quality job. Even a custom made powder color would not cost 1800.00. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | so getting a powder coat applicater at harbor freight and doing it myself wouldn't be a good idea... |
|
| |
|
Cruiser
Posts: 93
Saskatchewan (hard to say, easy to draw ) | Nope! Take a trip to Vancouver Island, look at the Orcas and caves and stuff, talk to Gerica for $40 and have some riding fun! |
|
| |
|
Tourer
Posts: 390
| varyder - 2010-04-21 6:16 PM
so getting a powder coat applicater at harbor freight and doing it myself wouldn't be a good idea...
It's just when you cure it in the kitchen oven, the female unit overheats.  |
|
| |
|
Visionary
Posts: 1436
| Got a buddy that could do mine for free, but I like the aluminum, lol.... I agree with the earlier post which suggests $300. Now if you have someone doing the chrome powdercoating in colors it runs a little bit more but I'd expect no more than around $750 for all the aluminum panels. |
|
| |
|
Cruiser
Posts: 228
| Got mine done two weeks ago.......gloss black powdercoat with clear powdercoat on top.......all the aluminum except console (which I had done last year to eliminate windshield glare) $100 total. Done at a local powdercoat shop and they look excellent! |
|
| |
|
Cruiser
Posts: 115
Columbus, Ga | Well I dropped off all the aluminum panels today to the powdercoater and he quoted $175.00. Now I have to wait and see what I get back. I did get to see some of the work he had laying around the shop and it looked good. |
|
| |
|
Cruiser
Posts: 169
Iowa | Thinking about doing this myself. Keep us posted on your progress. Pics are always good. |
|
| |
How much to Powdercoat
