You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




HEADLIGHT WARNING!!!!
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Bearcat
Posted 2009-11-28 11:06 PM (#48721)
Subject: HEADLIGHT WARNING!!!!


Cruiser

Posts: 173
Prescott Valley, AZ
If you plan on riding in Christmas "Light Parade" DO NOT use felt to cover your headlights!!!!!! I learned this the hard way tonight and now have two "eyebrows" burned into the plastic headlight housing/cover!!

It does not appear to lessen the amount of light projected out but to say it is an "eyesore" is putting it lightly! I'll post a pic tomorrow when I get it out in the daylight.

Top of the page Bottom of the page
Bearcat
Posted 2009-11-29 11:58 AM (#48751 - in reply to #48721)
Subject: RE: HEADLIGHT WARNING!!!!


Cruiser

Posts: 173
Prescott Valley, AZ
Here is what the felt did to the cover. This parade was less than 40 minutes long and temps were mid to low 40s.



(Light Parade 015.jpg)



Attachments
----------------
Attachments Light Parade 015.jpg (66KB - 3 downloads)
Top of the page Bottom of the page
david.terry
Posted 2009-11-29 12:06 PM (#48753 - in reply to #48721)
Subject: Re: HEADLIGHT WARNING!!!!


Cruiser

Posts: 102
Madison, AL
Ouch, thanks for the heads-up.
Top of the page Bottom of the page
VisionNWRider
Posted 2009-11-29 12:15 PM (#48754 - in reply to #48721)
Subject: Re: HEADLIGHT WARNING!!!!


Iron Butt

Posts: 639
Tri Cities, WA
Wow that sucks.
Top of the page Bottom of the page
Lotzafun
Posted 2009-11-29 12:48 PM (#48757 - in reply to #48721)
Subject: Re: HEADLIGHT WARNING!!!!


Iron Butt

Posts: 935
Rockford, IL
Ouch....sucks.....

However....judging by the picture....this might possibly be fixable.....maybe.

However unless you know how to wetsand and polish this is probably isn't something you are going to be able to fix yourself. Its something a collision facilty can possibly fix. Take the bike by a collision shop or two and see what they think. I cant truly tell or know without looking at the headlamp myself, but my experience tells me that this looks fixable. Would probably take 1.5 to 2.0 hours.

Or maybe a professional detailer who knows what they are doing might be able to fix the damage. This route might be cheaper than a collision shop.

Once its fixed I think worse case scenario there might possibly be some barely visible distortion in the lens. Wouldn't really know until all is said and done though.
Top of the page Bottom of the page
Lojak
Posted 2009-11-29 12:52 PM (#48758 - in reply to #48721)
Subject: Re: HEADLIGHT WARNING!!!!


Cruiser

Posts: 255
New Brunswick , Canada
Thanks for sharing this info , BearCat
Top of the page Bottom of the page
Mongo
Posted 2009-11-30 12:54 PM (#48804 - in reply to #48751)
Subject: RE: HEADLIGHT WARNING!!!!


Cruiser

Posts: 153
Newnan, GA

What about sanding and buffing the lens?

I've been able to do that to my Goldwing to remove pits from the lens. First clean the plastic with Mineral Spirits to remove the glue from the Lens. Wipe the lens dry. Use 2000 grit wet sanding paper. Use clean water and sand the lens until the pitting is gone. Use a good polish like Flitz and a clean buffing wheel to buff out the lens. If the pitting is too deep you'll need to rreplace the lens or lamp Assy.

Good luck

Top of the page Bottom of the page
Mfoster
Posted 2009-11-30 1:37 PM (#48808 - in reply to #48721)
Subject: Re: HEADLIGHT WARNING!!!!


Cruiser

Posts: 205
It is symmetrical. I say have a pin-striper make it into evil eyes! Make that lemon into lemonade..
Top of the page Bottom of the page
Bearcat
Posted 2009-11-30 7:09 PM (#48831 - in reply to #48757)
Subject: Re: HEADLIGHT WARNING!!!!


Cruiser

Posts: 173
Prescott Valley, AZ
At this point I'm willing to try "almost" anything. The plastic is damaged pretty deeply and although I don't think it will cause blown bulbs the pics don't really do justice to how deeply the plastic has melted. I'm a tad leary about trying to polish it out any although that might work. As the assembly costs more than $430.00 plus at least 1.5 to 2.0 hours labor, I'm thinking if the bulbs don't blow out I'll wait and see if "uncle" has a refund for me and in the mean time I may attach some shaggy fabric to the defects so that it looks like eyebrows until I get it replaced!!
Top of the page Bottom of the page
Mongo
Posted 2009-11-30 7:32 PM (#48834 - in reply to #48831)
Subject: Re: HEADLIGHT WARNING!!!!


Cruiser

Posts: 153
Newnan, GA
Wow! That's some big time cabbage. I hope it goes well for you either way
Top of the page Bottom of the page
showdawg
Posted 2009-11-30 7:56 PM (#48836 - in reply to #48721)
Subject: Re: HEADLIGHT WARNING!!!!


Puddle Jumper

Posts: 14
Try a product called flitz we use them to bring back the lenses of the headlight lenses that have been oxidized from the sun. It won't hurt the lense. It works best if you can use a buffing pad on a die grinder.

Good luck
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™