You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 53
Island Lake, Alberta, Canada | Just installed VFC with a little installation twist. Found that on rear cylinder head the valve cover gaskit was improperly installed, hanging out a little & blocking the injector harneess from going back on. Went back to the garbage can for left over packing from fairing lowers & cut a peice of the clear plastic with a molded 90 degree, about 6" long. Slid the plastic between injector & valve cover gaskit from the RH side. Got SO to hold in place, thereby making her feel like part of the team. From the left, reached in & slid the connector in place real easy. Due to lack of "Vision" room, this only took about a hour of peeking & squinting with lights & mirrrors to figure out why the connector would not go into place. Noticed on removal of original connctor removal that the rear harness took some wiggling & reefing to remove from injector. Now the fun part, road test & tuning with stock pipes, air defusser & perf. air filter.
Chow for now. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Injector Harness
