|
|
Cruiser
Posts: 241
Monrovia, Ca | Need everybody's help, had no cruise control or brake lights so I took the little microswitch off underneath the front brake lever, clean that up I know have taillights but
my cruise control does not activate. Any ideas? |
|
| |
|
Tourer
Posts: 573
Central Illinois | Check the rear brake switch and the clutch switch. Any of them will stop the cruise from working. |
|
| |
|
Tourer
Posts: 324
New Orleans, La, | Is the cruise control not coming on, ie the R pod on/ off swith not lighting up, or does the cruise control not activate when setting the speed cause the problem/solutions are different. Please up date your information. Thanx. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | Cruise light on pod comes on. Doesn't activate |
|
| |
|
Tourer
Posts: 324
New Orleans, La, | Chek the electrical connections for both break light switches and tne connection for the cruise module. The module connection can be seen through the opening right of the console just to the left of the top conner of the fuel door. In a very hard rain it will get wet and short for a until dry. I assume you checked the obvious, the fuses. Hope that gets it back. |
|
| |
|
Cruiser
Posts: 241
Monrovia, Ca | Yes, check the module connection and the switch under the front brake housing. where is the rear brake light switch?
|
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | I had a problem with my battery terminal not staying tight. The cruise not engaging was the first indication I needed to check the battery. |
|
| |
|
Visionary
Posts: 4278
| Guess you have to pull dash and see if there is power go to switch and coming back |
|
| |
No cruise
