You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




New to the Vision
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Victory General DiscussionMessage format
 
cskiwild
Posted 2011-06-09 7:11 PM (#88472)
Subject: New to the Vision


Puddle Jumper

Posts: 8
Haverhill MA
Traded my Kingpin for an 08 Vision. Trying to find out anything I can about Visions. I know I love the ride and handling. Anything that I should know about the 08 model?
Top of the page Bottom of the page
#57
Posted 2011-06-09 7:37 PM (#88473 - in reply to #88472)
Subject: Re: New to the Vision


Tourer

Posts: 415
Yup, you need to add CAMS!!!!!
Top of the page Bottom of the page
cskiwild
Posted 2011-06-09 8:29 PM (#88476 - in reply to #88473)
Subject: Re: New to the Vision


Puddle Jumper

Posts: 8
Haverhill MA
NO! Need ipod/mp3 first!
Then:
More lights that blink and flash in the back and front
Fuel Controller
Torque Tubes
Dyno Tuning by Llyodz

Then If and when the motor breaks I'll do the jump.

Heard about a rear sproket that was cracked on a Vision anyone know about that??
Top of the page Bottom of the page
wtwhitelaw
Posted 2011-06-09 8:51 PM (#88477 - in reply to #88472)
Subject: Re: New to the Vision


Cruiser

Posts: 262
Flowery Branch Ga
The only rear sprocket that I have read of was a defective Ness part that Ness replaced. Flashing lights?


Wayne
Top of the page Bottom of the page
#57
Posted 2011-06-09 8:56 PM (#88478 - in reply to #88472)
Subject: Re: New to the Vision


Tourer

Posts: 415
Torque Tubes??????? Soooo much to learn Grasshopper!
Top of the page Bottom of the page
cskiwild
Posted 2011-06-09 9:19 PM (#88483 - in reply to #88477)
Subject: Re: New to the Vision


Puddle Jumper

Posts: 8
Haverhill MA
Yes there are several mods to make the trunk lights work as directional and stop lights. I am looking at the BackOff option as well. I like to be seen!! Don't want tubes for Vision need Vision Intake Plate.
Top of the page Bottom of the page
gcefalo
Posted 2011-06-09 9:35 PM (#88488 - in reply to #88472)
Subject: Re: New to the Vision


Puddle Jumper

Posts: 48
Simpsonville, SC
ride it like there is no tomorrow. worry about the other stuff later
Top of the page Bottom of the page
Cometman
Posted 2011-06-09 9:38 PM (#88490 - in reply to #88472)
Subject: Re: New to the Vision


Tourer

Posts: 520
Simi Valley, CA
Add items? That takes time. Just ride the damn thing!
Top of the page Bottom of the page
loren2
Posted 2011-06-09 9:48 PM (#88491 - in reply to #88472)
Subject: Re: New to the Vision


Cruiser

Posts: 166
Bullhead City, AZ
May not need them where you are now, but the lowers are great for riding in the cold as well as the heat. Just ride it you already have one of the best bikes on the planet.
Top of the page Bottom of the page
Liandra
Posted 2011-06-12 4:37 PM (#88654 - in reply to #88472)
Subject: Re: New to the Vision


Cruiser

Posts: 188
Tifton, GA
Go here and buy
http://www.vision-mod.com/
I love the way these look and make the turn signals and brake lights easier to see.
Top of the page Bottom of the page
cskiwild
Posted 2011-06-12 5:21 PM (#88655 - in reply to #88472)
Subject: Re: New to the Vision


Puddle Jumper

Posts: 8
Haverhill MA
gcefalo and Cometman,
Did what you said this weekend rain and all. Road to Americade Saturday and home today.
Top of the page Bottom of the page
joe schmoe
Posted 2011-06-12 5:21 PM (#88656 - in reply to #88472)
Subject: Re: New to the Vision


Tourer

Posts: 446
East TN
Let's see mods in this order:
1. Ipod interfaxce
2. Kuryakyn 4710 with LED's under the lid seal of the tour pack (You will be seen for MILES)
3. Upper and Lower wind deflectors from CycleOps (in your choice of color or chrome)
4. CAMS, VFCIII, and Intake plate
5. CAMS, VFCIII, and Intake plate
6. CAMS, VFCIII, and Intake plate
7. CAMS, VFCIII, and Intake plate
8. CAMS, VFCIII, and Intake plate
9. CAMS, VFCIII, and Intake plate
10. CAMS, VFCIII, and Intake plate




Top of the page Bottom of the page
Trekwolf164
Posted 2011-06-12 6:51 PM (#88657 - in reply to #88656)
Subject: Re: New to the Vision


Iron Butt

Posts: 965
New York State
2008 Vision look for a leaky Gas Cap there is an imporoved cap.Watch passenger floor boards there are now improved clips. Find out if your radio has the correct flash. looks for cracks or water in headlight..
Change oil every 2500 miles take pictures add time to your trips cause people will ask you questions
Ride safe
Top of the page Bottom of the page
johnnyvision
Posted 2011-06-12 8:26 PM (#88665 - in reply to #88472)
Subject: Re: New to the Vision


Visionary

Posts: 4278
How much money do you have? Cause all of us can spend it for you in a days time. You'll find so much enjoyment in your vision and the question from strangers and the wow's. Be ready for the harley guys that don't understand what a real motorcycle is. You'll find you hate the days you can't ride and the days you can you'll be looking for great places to go and before you know it a two hundred mile day is not long enough. Keep in mind that the problems you find here are 1% of the bikes and the other 99% are doing just fine. Christmas is in your garage ever day now. Good for you!

Edited by john frey 2011-06-12 8:28 PM
Top of the page Bottom of the page
SYNSTR
Posted 2011-06-12 9:50 PM (#88671 - in reply to #88472)
Subject: Re: New to the Vision


Iron Butt

Posts: 785
Mt. Vernon, WASH.
I'd click on the FORUM link @ the top of this page and read the archived Q&A and tech stuff and use those as a guide before you go out and throw $97Million dollars in aftermarket stuff on that you won't like or find is a benefit. Everyone who has made inputs especially in the Q&A side is usually right on the money opinion wise.
Study your options first.
Top of the page Bottom of the page
CycleOps USA
Posted 2011-06-27 6:43 PM (#89755 - in reply to #88656)
Subject: Re: New to the Vision


Tourer

Posts: 323
N. Miami, Florida
joe schmoe - 2011-06-12 6:21 PM

Let's see mods in this order:
1. Ipod interfaxce
2. Kuryakyn 4710 with LED's under the lid seal of the tour pack (You will be seen for MILES)
3. Upper and Lower wind deflectors from CycleOps (in your choice of color or chrome)
4. CAMS, VFCIII, and Intake plate
5. CAMS, VFCIII, and Intake plate
6. CAMS, VFCIII, and Intake plate
7. CAMS, VFCIII, and Intake plate
8. CAMS, VFCIII, and Intake plate
9. CAMS, VFCIII, and Intake plate
10. CAMS, VFCIII, and Intake plate


I like the way you think Gardner, I like the way you think! But you forgot a few things for the list from me... engine covers, wedges, a linkage, a luggage rack, and a Kewl Key as the literal, and quite proverbial I might add, cherry on top!

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2025 Victory Riders Network™