You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Small Crack in Cee Baileys
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision Tech Q&AMessage format
 
Man314
Posted 2010-09-26 9:13 AM (#70386)
Subject: Small Crack in Cee Baileys


Tourer

Posts: 575
Spirit Lake IA "Birthplace of Victory Motorcycles"
About a month ago, I noticed a small crack in the lower portion of my Cee Baileys windshield on my 09 Vision. There is no evidence of impact.  It has spread and now it is roughly twice the length (~1mm).  I know with glass, windshield guys can fill it with clear epoxy under vaccuum and keep it from spreading.  Has anyone done this with these plastic windshields?  Should I be able to get it fixed/replaced under warranty?  Thoughts and advice appreciated.
Top of the page Bottom of the page
Tarpits99
Posted 2010-09-26 9:43 AM (#70388 - in reply to #70386)
Subject: Re: Small Crack in Cee Baileys


Iron Butt

Posts: 742
North Orange County CA
Acrylic and lexan are a lot like glass in that cracks will continue to spread.

If you drill really small hole at the end of the crack you can dissipate the stress to a wider area and stop it from traveling any further.

You can then try to partially seal the crack with Weld-on #3 (available at most plastic houses and sign supply companies) which is a clear water thin solvent used to "solvent weld" or melt acrylic / lexan. If you decide to do this you will need a plastic syringe which is a squeeze bottle with a "needle" on the end as well.

DO THIS OFF THE BIKE - Weld-On is a very "hot" solvent and will ruin the paint and melt most plastics before you have a chance to say "oh crap".

If you drip a little on the shield DO NOT attempt to wipe it up just let it dry, otherwise you'll end up with a worse mess than you can possibly imagine.

The repair probably wont look any better than the crack but it will stop it from growing.


Edited by Tarpits99 2010-09-26 9:47 AM
Top of the page Bottom of the page
SongFan
Posted 2010-09-26 9:46 AM (#70389 - in reply to #70386)
Subject: RE: Small Crack in Cee Baileys


Visionary

Posts: 3204
Memphis
I'd contact Cee Bailey.  They will probably send you a new one.  Great company from everything I've heard.
Top of the page Bottom of the page
VisionTex
Posted 2010-09-26 11:19 AM (#70396 - in reply to #70389)
Subject: RE: Small Crack in Cee Baileys


Visionary

Posts: 1484
LaPorte,Tx.
Mark, stop taking the Vision to 120!! TOO MUCH PRESSURE!
Top of the page Bottom of the page
Vinner1
Posted 2010-09-26 5:51 PM (#70414 - in reply to #70389)
Subject: RE: Small Crack in Cee Baileys


Cruiser

Posts: 266
Hartland, , WI
SongFan - 2010-09-26 8:46 AM

I'd contact Cee Bailey.? They will probably send you a new one.? Great company from everything I've heard.


+1

I got one from Cee Bailey and talked to them about a unique situation...they were awesome!
Top of the page Bottom of the page
Wizard523
Posted 2010-09-26 5:57 PM (#70415 - in reply to #70414)
Subject: RE: Small Crack in Cee Baileys


Tourer

Posts: 506
Woodland Hills, CA
Vinner1 - 2010-09-26 2:51 PM

SongFan - 2010-09-26 8:46 AM

I'd contact Cee Bailey.? They will probably send you a new one.? Great company from everything I've heard.


+1

I got one from Cee Bailey and talked to them about a unique situation...they were awesome!


Agree; Cee Baileys is the best! You can fix the crack as has been suggested, but I would first contact Cee Baileys. I would be surprised if they didn't help you out.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™