You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 256
| I installed some brake and turn bulbs today from here http://www.autolumination.com/3157_3156.htm and they look and work great but of course no cruise. I thought I read if I installed all 6 as leds I would be fine but they are different as the brake ones flash. Well anyone have any good ideas for adding a resistor or some nice kit that will plug and play. I have little time as I am moving into a new house with many projects. The simplier the better. Thanks |
|
| |
|
Cruiser
Posts: 256
| I found some load equalizers but with the heat is there any safe place back there to wire them? Also what is the wattage of a normal 3157 bulb?
Edited by Prime Power 2010-01-15 6:47 PM
|
|
| |
|
Cruiser
Posts: 256
| Well found bought some 10 ohm wirewound resistors at radio shack, parallelled them with the bulbs with the connectors under the seat. Working great. Don't know if I needed all six, but I know it works. Cruise control, normal flash for turns, and the blinking brake lights. No pics, but a happy face. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2025 Victory Riders Network™
|
|
Need Brake Light LED Help
