|
|
Iron Butt
Posts: 623
| I just returned home from a 370 miles trip each way to see KevinX for the Lloydz Cams install. the only 2 bad things about it is I didn't do it sooner, and now I have sore cheeks from smiling for the 5+ hour ride home.
Everyone has heard what good things it does for the bike and they are true. on the same trip back home in reverse with me throttleing harder I gained 3.4 MPG and the bike just loves to take off. Can't wait to get it in the North Georgia mountains this week.
It was a great time meeting and talkin to KevinX, he and his family are good people.....if you go down, make sure you take Kevin up on the Pork Chop offer, good eats! |
|
| |
|
Tourer
Posts: 537
, FL United States | Good deal. I can not wait until Kevinx does my cams. |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | I love it when a plan comes together*LOL* |
|
| |
|
Tourer
Posts: 506
Woodland Hills, CA | Hey Kevin, any idea of when you will be coming out to southern California/Arizona to do the cams? I know you have been waiting to get them, but I was wondering if you had any sort of update. I am still very interested, along with a couple Vision riders in Ventura County. Thanks.
|
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Wizard523 - 2009-05-24 9:40 PM
Hey Kevin, any idea of when you will be coming out to southern California/Arizona to do the cams? I know you have been waiting to get them, but I was wondering if you had any sort of update. I am still very interested, along with a couple Vision riders in Ventura County. Thanks.
Cams came in just in time for the VFC3 to go on backorder 
Everything should be in place at the end of this week, and I can start firming up a date. |
|
| |
|
Iron Butt
Posts: 623
| I'm going to try to get a Dyno run and sheet this week, when'if I do I'll post |
|
| |
|
Cruiser
Posts: 64
Columbia,MO | i have the cams just need them installed now. I have the Lloyds intake and vfcIII installed already. About how long does it take to install the cams and do you have to pull the motor or just drop it down? My mechanic has never done a set and I was wondering if there was any tricks to make it easier. The help would be appreciated. |
|
| |
|
Cruiser
Posts: 257
Under the Rule of Jedi - Masshole | BarryBennett - 2009-05-25 10:45 PM
i have the cams just need them installed now. I have the Lloyds intake and vfcIII installed already. About how long does it take to install the cams and do you have to pull the motor or just drop it down? My mechanic has never done a set and I was wondering if there was any tricks to make it easier. The help would be appreciated.
This might answer your question.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=3461&pos... |
|
| |
|
Cruiser
Posts: 64
Columbia,MO | thanks member no. 1 |
|
| |
|
Iron Butt
Posts: 810
| Wizard523 - 2009-05-24 6:40 PM Hey Kevin, any idea of when you will be coming out to southern California/Arizona to do the cams? I know you have been waiting to get them, but I was wondering if you had any sort of update. I am still very interested, along with a couple Vision riders in Ventura County. Thanks. +1
|
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | TimS - 2009-05-27 10:57 PM
Wizard523 - 2009-05-24 6:40 PM Hey Kevin, any idea of when you will be coming out to southern California/Arizona to do the cams? I know you have been waiting to get them, but I was wondering if you had any sort of update. I am still very interested, along with a couple Vision riders in Ventura County. Thanks. +1
Well it looks like things are FINALY going to all be in one place today, or tomorrow. I will then be able to schedual dates. I am glad I waited though as all of the delays would have had me with a couple of tickets for nothing |
|
| |
|
Cruiser
Posts: 204
guelph ontario | Question for you Canadian dudes-has anyone had the cams installed by anyone up here in Ontario. Kevinx-are you willing to come to Toronto if there are enough guys up here who want the cams installed? |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | Can the cams for an '08 along with the intake plate be installed without any other modification and get the gains cited? I'm running stock exhaust and will stay with them until they rot, but would like the HP and gas mileage gains from the cam and plate. So what else would I need to do after the plate and cams are installed? |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Cams won't get you much at all with stock exhaust.
Love to visit Canada, but need to get my passport straight first |
|
| |
|
Iron Butt
Posts: 1117
Northeast Ohio | varyder, you will need more fuel from a VFC or Power Commander. Regardless of the pipes, you are putting more air into the engine and WILL run lean. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | Thanks ScoreBo and Kevin. It is an obvious answer, but had to ask. I'm adding the cams commander and intake to my wishlist when I do the exhaust on mine when the time comes. I'm about 2k away from pulling the exhaust to do my belt and I'm going to put all new gaskets and check for the phantom leaks. Maybe at the 90K mark I'll do the new exhaust if it will hold out that long, That's just a year and a half away. |
|
| |
|
Iron Butt
Posts: 600
Linwood, MI | Probie - 2009-05-28 7:25 AM
Question for you Canadian dudes-has anyone had the cams installed by anyone up here in Ontario. Kevinx-are you willing to come to Toronto if there are enough guys up here who want the cams installed?
Maybe we can get him to do it in Detroit or Port Huron and get the Michiganders and the "Canadian-dudes" in one whack.  |
|
| |
|
Cruiser
Posts: 204
guelph ontario | I think that if Kevin comes to Detroit or Port Huron or for us even Buffalo-that would work -not far from me to Port Huron or Detroit-so lets see who is interested-I for one. |
|
| |
|
Tourer
Posts: 305
Vineland, NJ United States | returned home from where? Where did you go to have KevinX do the work? |
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | Rebel - 2009-05-28 7:08 PM
Probie - 2009-05-28 7:25 AM
Question for you Canadian dudes-has anyone had the cams installed by anyone up here in Ontario. Kevinx-are you willing to come to Toronto if there are enough guys up here who want the cams installed?
Maybe we can get him to do it in Detroit or Port Huron and get the Michiganders and the "Canadian-dudes" in one whack.
Even after having a local mechanic install my LLoyds equipment..(what a difference!).I would still like to have Kevinx look at my VFC to insure it is correct...not to mention to meet the guy everyone speaks so highly of.
Coop |
|
| |
|
Fountain Inn, SC United States | ProStreet - Not knocking Kevinx, but if you are willing to travel to him, I think Lloyd is closer (in NY). |
|
| |
|
Cruiser
Posts: 184
Allen Park, MI | JAM - 2009-09-22 8:46 AM
ProStreet - Not knocking Kevinx, but if you are willing to travel to him, I think Lloyd is closer (in NY).
Thanks Jam...I was referring to him coming to Michigan...
Coop |
|
| |
|
Cruiser
Posts: 110
| Still interested in a cam party in Phoenix or area... I have a location secure enough for all the bikes with A.C. I am willing to open up. |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | JAM - 2009-09-22 8:46 AM
ProStreet - Not knocking Kevinx, but if you are willing to travel to him, I think Lloyd is closer (in NY).
Agreed. Also I have an excellent relationship with Lloyd, and do not want to pick the crops from his garden |
|
| |
Cams installed
