Cruiser
Posts: 222
Barefoot Bay, FL United States | Has anyone figured out what "AIR" shock can be used on the Vision, and have done the replacement yet?? Almost 91K on my 2008, and have had issues lately with oil leaks from the rear shock. I've been watching some of the videos out there, but they are ALL with the Cross bikes. The system looks to be about the same with regard to swingarm, frame, and upper/lower mounting system. Do you suppose the air system for the Cross bikes would fit the Vision? Jedi Jeff, et.al., IS ANYBODY OUT THERE??? witchbiker in Florida 2008 Vision, 90k+ Freedom Perf. Pipes (2nd set...NEVER AGAIN!!!) MERRY CHRISTMAS TO ALL FROM CENTRAL FLORIDA !!!
|
Cruiser
Posts: 222
Barefoot Bay, FL United States | All,
I'm looking for a shock that will eliminate the "rocker push rod" on the right, and the "rocker pivot" on the top, so the bottom of the shock would fit in the "middle" of the swing arm, in between the arms of the swing arm, as opposed to the shock on the left side and the "rocker push rod" on the right side.
witchbiker
'08 Vision
90K+ w/leaking shock!!! |
Shocks....AGAIN!!
shock components.jpg (32KB - 1 downloads)
