Hello All,

After desnagging an electrical issue that led to changing a couple of wires, the 40 amp breaker and a couple of fuses, I then moved on to the difficult job... changing a bloody light bulb.,, LOL!!

While dismantling the front end... my mitts do not fit in small places... I learned something very important... my local Victory Dealer... 3 hrs away, is NEVER again working on my bike. After the shop put my bike together after a crash, I found a number of connections missed, and a number of screws missing. 

I also went out and bought a new HID bulb because I thought that the shop did not replace the one that was installed and broken, however, what they did was connected it to the switch on my center console that is used to control my highway lights. Now my highway lights do not appear to work.

I am currently looking through the wiring diagrams to find physical connection points that might have been switched. Does anyone have any ideas of where I should be looking for the correct connections to switch?

Thanks

Thanks for the info... After taking a closer look at the wiring diagram I will have to apologize to my dealer the next time that I am down there... I found the issue... there is a relay within the wiring of the fog lights... it was the issue... now to find a replacement...

 This thread can now be closed. I did post this as well in the Tec forum and I will keep that there in case someone else should have the same issue

Thanks All