You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Tourer
Posts: 319
| Can anyone supply me the dimensions of the stock air Filter......leangth height and width? |
|
| |
|
Tourer
Posts: 319
| Has anyone just installed the high flow air filter....Victory makes one and so does Ness.... |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | If your are just wanting swap out the filters for the higher air flow, I wanted to do the same thing and the dealer said that is not a good idea. The reason is with more air flow in you need it going out too and would also have to remap the system. Even if you didn't do the exhaust you'd still have to do a remap but they don't make one for an in between, more intake, some exhaust. Anyway, the more techy guys can give you a better answer. |
|
| |
|
Tourer
Posts: 319
| I'm going to contact K&N and see what they say. |
|
| |
|
Visionary
Posts: 1436
| Banjo, you can run a higher flow filter BUT you will need to richen up the map because the higher flow will lean it out. You won't get as much out of the high flow filter alone as you would if you did filter and pipes, BUT I believe the stock pipes will flow enough to offset the increased intake without stuffing up.
Can I ask WHY you are wanting to go high flow?
Some may not know but there is an additional air intake plate under the dash on the top of the frame. I think Lloyds and Ness offer the high flow setup for that. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Air Filter
