|
|
Puddle Jumper
Posts: 12
Central Jersey! | I just purchased and installed front and read sequential lighting kits from Gary Lighton. Super easy plug and play. Good directions and took a couple hours to do both front and back. And damn if they don't look awesome! I really like when the brake is applied and all 6 lights burn bright. Check him out.... gary@grlighton.com |
|
| |
|
Cruiser
Posts: 79
Louisville, KY | I just put them on my bike as well and really like the look. One of the sequencers for the front is not working though and starting to bug me.
Chuck |
|
| |
|
Cruiser
Posts: 123
NE Florida Jacksonville | I have been using his rear sequential harness for a year now and have gotten lots of compliments on how good she looks. Gary's product is very well made and he stands behind his product.  |
|
| |
|
Cruiser
Posts: 50
| Matt
Just curious how much does the harness cost and how long does it take to put in?
It would be nice to have the extra visual on the rear end.
Thanks
Rick |
|
| |
|
Puddle Jumper
Posts: 30
Carlisle, PA | Here is Garys website.
http://www.vision-mod.com
Pretty reasonable I think. Im ordering mine tomorrow! |
|
| |
|
Puddle Jumper
Posts: 12
Central Jersey! | I think they are worth the price.. now ALL the rear lights burn bright when brake is applied awesome effect and people can't miss them.... did I mention I like lights? lol |
|
| |
|
Tourer
Posts: 390
| Is there video of them working. The website does not have one. |
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | I was on it earlier this morning and saw a video of both front and rears lights operating. Click on products.
http://www.vision-mod.com/Products.html |
|
| |
|
Tourer
Posts: 390
| No video on my I-Pad. Watched it on my P.C. Cool |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | Here is my review.
http://www.vision-riders.com/bb/forums/thread-view.asp?tid=12987&po... |
|
| |
|
Cruiser
Posts: 79
Louisville, KY | We will see how well he stands behind the light sequencers.
I have one that only works about 30 percent of the time. I've been emailing Gary about it and he has been saying it will start to work, but it hasn't.
I want the problem fixed and he has me shipping the defective unit back.
He says he will fix it and send it back.
That's fine if I get things working but right now I have a bike with only on sequencer in the front and I'm shipping things back on my dime hoping the problem gets fixed.
|
|
| |
|
Cruiser
Posts: 79
Louisville, KY | Here is a video of the front lights. |
|
| |
|
Cruiser
Posts: 79
Louisville, KY | Here is a video of the front lights.
Attachments
----------------
 Lights.mov (195KB - 66 downloads)
|
|
| |
|
Visionary
Posts: 1365
Central Maryland | kin52 - 2013-08-08 10:19 PM
We will see how well he stands behind the light sequencers.
I have one that only works about 30 percent of the time. I've been emailing Gary about it and he has been saying it will start to work, but it hasn't.
I want the problem fixed and he has me shipping the defective unit back.
He says he will fix it and send it back.
That's fine if I get things working but right now I have a bike with only on sequencer in the front and I'm shipping things back on my dime hoping the problem gets fixed.
That is complete balderdash. I have been contemplating these sequential lights myself; but it only took your post to dissuade me not to purchase them. |
|
| |
|
Tourer
Posts: 324
New Orleans, La, | After reading the two not so favorable reviews of Garys' product and commitment to same I felr compelled to offer my personal experience with both. Two years ago I bought a second hand harness from a member of this forum that assured me that it was new and never been installed. Upon arrival I installed it and initially it did not sequence as stated on Garys' site, but upon further investigation of the information posted on the site he said there may be a short learning phase that needed to take place with some bikes. Left it installed for a couple of days and lo and behold the thing worked as billed. After a few weeks one side stop working and Ii tried to contact Gary with no luck through email then I pm' ed him through this site and BAM he responded.I explained to him that I did not buy the harness from him but was assured that it was brand new uninstalled. He said because of that hecould not honor the lifetime warranty, but if I send the harness and a nominal fee he would repair it. A little while latter I get a pm that he repaired it and that is o its' way. I get it, install it and bam it's working as billed. A few months latter it's only working on one side so I contact Gary and tell him what's happening and he seems quiet puzzled, but tells me to send it back , for a nominal fee, and he'll check it again. A few days latter he calls me and tells me all is go with the harness as tested on his personal Vision and that he added aditional weatherproofing to all connections. I get it back, install it and bam works great for one day and same old same old same old so I revert to my factory harness and call it my lost. The next week my battery goes out I drop in a new replacement and decide to give Garys' product one more try. All of this was two years ago and since then the product has met and exceeded my expectations and my experience with Gary as a vender is what all venders should try and emulate. Oh, and did I mention I did not make the initial purchase from him and he treated me better than venders thaf I was the orginal purchaser. Also ditto for Lloydz Motro Werks. This has been my experience with him and I recommend him and his products highly.JMHO. |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | My battery is original from 2008. Makes me wonder if I replaced it the sequencers would work when motor not running.
The sequencing effect is not captured well in the video above. I tried to video mine, but the camera just doesn't record it like it looks in real life. I am quite happy with the product and support. |
|
| |
|
Puddle Jumper
Posts: 46
| Have had the front and rear sequencing lights on my bike fro over two years -- no problems |
|
| |
|
Cruiser
Posts: 79
Louisville, KY | Well just got my replacement sequencer for the right side front turn signal and got it installed. Seems to be working fine and I'm happy. Gary said he would put a new sequencer on my harness and send it back but he actually sent a new harness (I use dielectric grease on everything). Just wanted anyone thinking about this mod to know the problem was corrected.
It did cost me about $6.00 to mail back a part that was bad from the start but it could have gone way worse.
Chuck |
|
| |
Sequential lights
