You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 271
Belding Michigan | I would like to move my bars up a little and back a little what is the max in can move and not have to replace wiring and cables. and who make them in chrome for the best price I am looking for plug and play. If I cannot then I will live with what I have but it would ease my neck if I could change. Archie |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | I think Witchdoctors and HMD are the only vendors who sell aftermarket bars for the Vision. You can get them in 2"back/2"up through 2"back/0"up sizes. The 2"back/1"up (the most popular) from both vendors uses the stock wiring, cables and hoses. I think HMD even claims his apes use the stock stuff but those are pretty high. WDs 2"back/2"up use the stock stuff but it's tough to zip tie to to the bars the whole way like stock. I'll probably end up with the 2"back/1" up from one of them. |
|
| |
|
Cruiser
Posts: 96
Princeton, IL | I have the 2" back and 1" up from HMD. I also have 1.5 inches of spacers under the bars. I did not have to replace any wiring or cables. I am 5'9" and these bars are way more comfortable than the stock 08 bars. It eliminated the little bit of lean forward to reach the bars that was hard on my back. I also have an 8 ball seat which lowers me even farther. Over all an easy swap. Drop me a line if you have any questions. |
|
| |
|
Cruiser
Posts: 134
, MO | Sammy how much we're the bars? |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
handle bars
