You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
New user
Posts: 2
| Ok I will admit I am a dummy, tried to remove my trunk from the CCT today for the first time and everything works great except... I can't get the electrical plug through the small space between the saddlebag bracket/fender & seat.. I turned it as many different ways as I could and it still would not easily come through the space so I could separate the trunk from the bike. What am I missing? 
|
|
| |
|
Cruiser
Posts: 71
B'ham, Al. | Ever get it out?? No problem with mine going or coming. Been a while since I took it off and I don't recall exactly how/where it came thru. Sorry, RR |
|
| |
|
Puddle Jumper
Posts: 16
| My limited experience is that you have to remove the seat. I'd like to know if there's an easier way as well. |
|
| |
|
Cruiser
Posts: 51
| If I remember from when I did mine, Squeeze the plastic loom that is over the wires and slide it through the should fit through ok. No need to remove the seat. |
|
| |
|
Puddle Jumper
Posts: 16
| pfhague - 2013-06-20 8:02 PM
If I remember from when I did mine, Squeeze the plastic loom that is over the wires and slide it through the should fit through ok. No need to remove the seat.
I believe the issue is the size of the plug. |
|
| |
|
New user
Posts: 2
| I think I am going to back to the dealership and have the salesman take the trunk off the floor model for me since he said it was a snap. |
|
| |
|
Puddle Jumper
Posts: 16
| pfhague had it right. I looked at mine while cleaning it this morning and saw that the harness was routed between the fender and saddlebag bracket, behind the forward standoff. I managed to get the harness out by removing the saddlebag attaching clip. I then rerouted the harness forward of the standoff. With the side panel removed, the seat will flex enough to slide the harness between it and the chrome bracket. I'll try to post a picture if needed. |
|
| |
|
New user
Posts: 1
| No need to remove seat or anything else. All you have to do is slide the wire loom between seat seat and the bracket. |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
CCT Trunk Removal
