You are currently not logged in.  Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.

Search:




Exhaust Tips
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Discussion -> Vision DiscussionMessage format
 
Street Eagle
Posted 2013-07-23 11:45 AM (#141997)
Subject: Exhaust Tips


Iron Butt

Posts: 691
Manchester, CT
Fellow Riders..

Does an exhaust tip change the note of the exhaust? I've watched videos that have been posted, specifically Gatling and Mr Wizard but its really hard to tell what the actual change in the exhaust note is. In one of the Mr Wizard videos it sounds like a turbine or jet engine starting up???

If tips actually do change the exhaust note then I am looking for a tip that provides a throatier and louder sound. I am currently running L1S1 exhaust

As always, any and all input and recommendations are greatly appreciated!
Top of the page Bottom of the page
opas ride
Posted 2013-07-23 1:37 PM (#141999 - in reply to #141997)
Subject: Re: Exhaust Tips


Tourer

Posts: 500
I heard a Vision last year at the AVR that had stock exhausts, so he said, with the Gatlin Tips drilled out and it sounded great....I am happy with my S1L1 and they are fine for these old ears...Not to loud, not to soft...JMHO
Top of the page Bottom of the page
Cometman
Posted 2013-07-23 3:10 PM (#142000 - in reply to #141997)
Subject: Re: Exhaust Tips


Tourer

Posts: 520
Simi Valley, CA
No real difference in the two....

my video to overdubbed a warp engine sound

Edited by Cometman 2013-07-23 3:11 PM
Top of the page Bottom of the page
Street Eagle
Posted 2013-07-23 4:07 PM (#142001 - in reply to #141997)
Subject: Re: Exhaust Tips


Iron Butt

Posts: 691
Manchester, CT
Hey opas ride

I really like the exhaust note when you start to open up the throttle. I was looking for a little more aggressive exhaust note at idle.

Cometman...thanks for sharing your dubbing effect
Top of the page Bottom of the page
johnnyvision
Posted 2013-07-23 6:48 PM (#142009 - in reply to #141997)
Subject: Re: Exhaust Tips


Visionary

Posts: 4278
pull your stock end caps and with a drill you can drill out the mounting plugs. Now go to hardware store ask for J nuts. Get 1/4" size and six 1/4 x 20 bolts. By the short ones. Get some lock washers. Go home slide the J nuts in place and bolt back on.
You do pick up good sound with out that black center
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Copyright © 2007-2024 Victory Riders Network™