You are currently not logged in. Logon or register to access more features. Vision-Riders.com is a FREE service provided by Victory Riders Network.
|
|
|
|
Cruiser
Posts: 294
rhode island | Anyone having an issue with them going on an off by themselves.
I think the wiring is being flexed to many times by the fork travle.
Havent found the break yet. 
Edited by sandman 2008-07-17 7:23 AM
|
|
| |
|
Cruiser
Posts: 110
| Mine go off when I run the brights on the headlight but no other problems. |
|
| |
|
Iron Butt
Posts: 810
| No problems with mine that I am aware of.
|
|
| |
|
The Poconos | No problems with mine. |
|
| |
|
Cruiser
Posts: 296
Central Florida | az rob - 2008-07-17 8:15 AM
Mine go off when I run the brights on the headlight but no other problems.
They are supposed to do this! HID goes off as well when hi-beams are on! |
|
| |
|
Cruiser
Posts: 294
rhode island | Devil boy
I've got one thats out then comes on then out again then blinks, not sure if this is what they had in mind. p.s H.I.D is supposed to stay on regardless of high beam.
Edited by sandman 2008-07-18 1:07 PM
|
|
| |
|
Iron Butt
Posts: 810
| Marc, Mine stay on with low and/or high beams. Tim |
|
| |
|
Cruiser
Posts: 296
Central Florida | sandman - 2008-07-18 1:05 PM
Devil boy
I've got one thats out then comes on then out again then blinks, not sure if this is what they had in mind. p.s H.I.D is supposed to stay on regardless of high beam.
I am sure that is NOT supposed to be happening! I routed my wiring UNDER and behind fender and behind fork legs. If one is blinking on and off, I would guess bad connection. First thing I would try is pull relay out of fuse box and reinsert. Then check bullet connections on both lamps.
this SHOULD be plug and play... BTW my HID stays on with High beams, but PIAAS go off with highs.. who can figure??? |
|
| |
Jump to page : 1
Now viewing page 1 [25 messages per page] | |
|
| Copyright © 2007-2024 Victory Riders Network™
|
|
Piaa light kit
